AC Input Reactor

General :

The AC input reactor is connected between power input wire and Variable-frequency Drive (VFD). It is used to suppress the input current harmonics by VDF; decrease the impact of voltage change and surge current caused by over voltage on the VDF; effectively protect VDF and improve the power factor and power quality.

Applications：

Industrial Automation, Renewable Energy, Rapid Transit, Smart Grid, etc.

Features:

●Vacuum Pressure impregnation (V.P.I) is used to enhance insulation property;

●Silicon steel of high permeability is exploited to reduce the magnetic core loss and noise;

●Strong overload capacity, high compressive strength;

●Superior protection against humidity, can operate in high humidity environment;

●Low temperature rise; can operate at high ambient temperature.

Technical Specifications:

●Standards: GB10229-1988, JB9644-1999, IEC289:1987

●Type: LSDZ01

●Rated Voltage: AC380V/50Hz   AC660V/50Hz

●Rated Current: 5A～1600A@40℃

●Dielectric Strength: Winding-core 3000VAC/50Hz/5mA/10s/no arcing and no breakdown

●Insulation Resistance: 1000VDC The insulated resistance value ≥100MΩ

●Insulation Class: Above class F

●Noise Level: 65dB(tested at 1m from the horizontal distance point of inductors)

●Degree Of Protection: IP00