Welcome Customer !

Membership

Dongguan Haida Equipment Co., Ltd.
Free Member ·1YRS
DongGuan,GuangDong
Manufacturer

Main Products: Tensile Testing Machine|Other Test Chambers|Rain Test Chamber/Rain Test Device High Temperature Aging Test Chamber, Heat Aging Test Chamber

Xwboo>Products

Dongguan Haida Equipment Co., Ltd.Free·1YRS

  • E-mail

    salesmanager@qc-test.com

  • Phone

    86-0769-89055588

  • Address

    Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

Contact Now

Automatic Steel UV Aging Test Chamber , Standard UVA Accelerated Weathering Tester

Model
Nature of the Manufacturer
Manufacturer
Product Category
Aging Test Chamber
Place of Origin
City, Province
Overview
Automatic Steel UV Aging Test Chamber , Standard UVA Accelerated Weathering Tester
Product Details

Automatic Steel UV Aging Test Chamber , Standard UVA Accelerated Weathering Tester

Product description:

UV Aging Test Chamber Optimal fluorescent UV lamps using analog section sunlight UV spectrum, combined with temperature control, and other apparatus for the wet material to cause discoloration analogy, brightness, strength decreases, cracking, flaking, dusting, oxidation and other damage sunlight (UV) , At the same time through the synergies between ultraviolet light and moisture makes the material a single light resistance or a single ability to weaken or failure, which is widely used to evaluate the weather resistance of materials


Application industry (not limited to the following):
1. Paint ink paint, resin, plastic
2. Printing and packaging, aluminum, adhesives
3. Motorcycle industry, cosmetics,
4. Metal, electronics, electroplating, medicine

5. Textile,fabric,rubber,and so on.

Applications function:
1.Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
2.To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.
3.Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects.

Test standard(inculding but not limited to... ):
Compliance with ASTM G154, GB/T5170.9 standards,etc.

The main technical parameters:

ItemSpecification
Inside dimension650 mm×1140 mm×500mm(D×W×H)
Outside dimension700 mm×1340 mm×1800mm(D×W×H)
Chamber materialSUS#304 stainless steel
Temperature rangeRT~70℃
Temperature fluctuation±2℃
Temperature controlPID SSR control
Humidity range:≥95%RH
ControllerProgrammable controller, LCD touch screen
Control modeBalance temperature humidity control (BTHC)
Test cycle settingUV exposure, condensation and water spray test cycle is programmable
Lamp power40W/Piece
Distance from sample to lamp50±2mm
Centre distance between the lamp70mm
Irradiance0.45~0.85W/m2 (optional)
UV lampsImported Atlas UV-A: 315-400nm
Testing time1~999s, m, h adjustable
Protection system

Overload short circuit protection

Over temperature protection

Water lacking protection

Earth leakage protection

Auto shut off protection

Chamber Structure


The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of SUS 304 steel plate.

The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature distribution.

Control System:

Adopts black aluminum plate to connect temperature sensor and adopts black board temperature meter to control heating so as to ensure more stable temperature.
The radiometer probe is fixed so as to avoid the frequent installation and disassembly.
The radiation quantity adopts the special UV irradiatometer with high-precision display and measurement.
The radiation intensity is not more than 50W/m2.
The illumination and condensation can be controlled independently or alternating and circularly.

Test Specimen Mounting:

The standard test specimen holder accommodates 2 panels 75×150mm. The test panels are actual the side wall of the chamber. To properly seal the chamber, it is important to have every panel holder filled with specimens or blank panels and to have panel holders in place.

UV Accelerated Weathering Tester_pdf.pdf

Automatic Steel UV Aging Test Chamber , Standard UVA Accelerated Weathering Tester 0

Similar Product Recommend