What material could fiber laser cutter cut?
Laser cutting machine has been used in many industries, there is a large space for development. in spite of this, there are still a lot of friends do not know how to laser cutting function to cut what material and metal fiber Laser cutting machine is mainly aimed at a kind of cutting metal, is a kind of thermal cutting, mainly cutting the following kinds of metal materials such as:
1.)Stainless steel
if you could accept oxidation on cutting end face than use Oxygen gas.
If You don’t like its axidation surface than use Nitrogen…its burn-free edge,don’t need further treatment
Here it is another tips for cutting stainless steel.Coating oil film on the surface of the sheet can obtain better perforation effect without reducing the processing quality
2)Titanium
Titanium plates are cut with argon and nitrogen as processing gases.
metal fiber laser cutter can cut a lot of material, the scope of application is also very wide. Laser cutting as an accurate processing method, can cut almost all materials, including thin metal plate two-dimensional cutting or three-dimensional cutting.as we could see In the field of auto manufacturing, the cutting technology of space curve such as car roof window has been widely used. Volkswagen of Germany uses laser with power of 500W to cut the body sheet and various curved parts of complex shape.
3)brass,coopper Or Aluminum
Character of brass or cooper is high reflectivity and very good thermal conductivity.
So if your work mainly is to cut Copper or brass..You must inform us supplier in advanced so that we suppliers could add “Reflection-absorption”device to our Software system.otherwise the reflection will destroy the optical components
For its high reflectivity,its cutting ability is much weaker than carbon steel or stainless steel.
if thickness of Brass or copper is less than 1mm you need Nitrogen.
if thickness less than 2mm you need oxygen gas.
Compared to Copper or brass.it is very easy to cut aluminum at same power for fiber laser generator..it is better use Nitrogen to cut Aluminum than Oxygen gas. using oxygen to cut aluminum its cutting surface looks rough and hardness.