Q1:.How we choose the power?
1000W, 1500W.2000W is much more popular at the moment.
to advice what power to choose.please get to know following question before place order.
which kind of metal will you weld? what thickness of metal?what material exactly?Aluminum?stainless steel?
Q2:.What material can be weld by this machine?
A:Our fiber laser welding machine can weld stainless steel, carbon steel, aluminum.
Q3:.What kind of gas shall we use ?
A: Argon gas will be used, its function is to blow the dust during welding, and cooling cutting edge after welding.
Its another function is to prevent protect lens from burning during weldind.
Q4:Can we use other gas when welding, becuase Argon gas is expensive?
A: Argon gas is better.
Air can be used, but its welding effect is not good. If we use air, the welding edge will be black or yellow.
Q5:Which parts are spare parts?
A: Protect Lens, Nozzel are spare parts.
Q6:How long does the nozzle should be replaced?
A: The nozzle are consumable part, it should be replaced near half of month to two months according to your welding quantity.
Q7:How long does the protect lens last?
A:if it is in normal use, it can keep near one week.
Sure, it is up to the material what we weld, if we weld carbon steel, there are jump slags during welding, the jump slag is easy to burn the protect lens.
Q8:How long does one jar of gas weld?
A: One jar of argon gas can weld 4 days if we weld 8 hours continuely per day.
Q9:How many pcs of protect lens and nozzle do you recommend for one year?
Consumable Parts:
Protect Lens: USD2 / PC recommend 100-200 pcs per year
Nozzle: USD5.5/PC recommend buy 30-50 pcs per year
Q8:Shall we choose wire feeding device or not?
A: if the gap is within 0.5mm, don’t need use wire feeding device.
Wire feeding device must be selected if the gap is more than 0.5mm,
if gap is 0.6mm, use 0.8mm wire,
if the gap is 0.8mm, use 1.0mm wire
if the gap is 1mm use 1.2mm wire,
if the gap is 1.2mm, use 1.4mm wire,
if the gap is 1.4mm, use 1.6mm wire.
We hope it could help you out.