Weighing indicator XK3190-DS1 is widely applied in electronic floor scale、electronic truck scale、static railway scale and so on alike static weighing system equipped with 1~16 digital load cell.
Product Details
Introduction:
Weighing indicator XK3190-DS1 is widely applied in electronic floor scale、electronic truck scale、static railway scale and so on alike static weighing system equipped with 1~16 digital load cell.
Standard Function:
•Able to connect several sorts of digital load cells (e.gHBM, Guangce, Zemic, Benui , Ruima, Boast)
•Auto/manual angle correction
•With correction mode for static railway scale
•Call and display inner code to replace weight observing and analysis tolerance
•Able to set up zero-tracking range, zero(auto/manual) range
•With tri-divisions switch function
•Non-linearity correction and calibration tolerance correction
•Password management and time power-off function
•Able to set up print function for auto/manual; no condition/under condition; daily/sorted statistics report printing
•Able to set up print function for fast filled weighing bill
•Weighing data save/check/delete protection in case of power off
•Able to input English character with a similar ASCII table
•Standard RS232C(RS422/RS485 optional) communication interface with selectable baud rate
•Standard scoreboard interface with 20mA current loop method
•Standard parallel print interface
•Able to print out cargo name, customer name, company name and notes in English character if printer supports standard English character printing
•Able to print weighing bill in linked(upright/transverse) format、record format or other customized format
•Able to save 1500 vehicle ID and corresponding tare weight、201 cargo ID and corresponding cargo name、100 customer ID and corresponding name、100 number ID and corresponding content、1501 weighing records
•Able to print out various parameters of indicator
•Digital load cell communication address modification function
•Single load cell and single angle data check function
Technical Parameter:
•Digital load cell connection
Connection method: RS422/RS485, capatiable both for four and six wires
Connection distance: About 1000 meters
Connection quality: 1~16
Load cell power: DC 12V, 0.8A(Max)
•Display
Display method: 7 bits VFD display, 7 indications
Display range: -325000~325000(d=10)
Division: 1/2/5/10/20/50/100 optional
•Keyboard
Numeric key: 0~9
Function key: 25
•Clock: real clock
•Scoreboard interface
Signal output method: serial
Signal: 20mA current loop(constant current)
Baud rate: 600
Transmission distance: ≤2000 meters
•Pinter interface
Method 1:with optional of micro built-in printer
Method 2:with standard configuration of parallel printer interface, able to connect with printer model LQ-300K.KX-P1131.KX-P1121.DS-300