Plastic Junction Box

NegotiableUpdate on September 07

Model

Nature of the Manufacturer: Manufacturer

Product Category: Junction Box

Place of Origin: City, Province

Online Consult Contact Information

Overview

As sensor label may be different when using the weighing apparatus with different number sensor, please following the wiring diagram of weighing apparatus to connect the wire.

Product Details

4/6/8/10 Channels Plastic Junction Box for Load Cell

pecifications:

1. Adjusting methods: input voltage and output signal.

2. With two types of cases: stainless steel or plastic optional.

3. Protection type: IP67 (stainless steel), IP65(Plastic).

4. Connetion: Up to 4/6/8/10 load cells.

How to install:

1. Fasten connecting box to scales in a suitable place, and open the lid of connecting box.

2. Lead the sensor cable and instrument signal cable through the connecting box's connector. And connect all of cables as the PCB identification. Then, tighten all screws.

3. Connected the shielding line of all cables to the grounding column GND of the junction box.

How to debug:

According to output signal size of sensor and wiring diagram, adjust the relevant potentiometer. (Attention: don't adjust the potentiometer overly) .Then, close the junction box lid and tighten screws.

Attention:

1. As sensor label may be different when using the weighing apparatus with different number sensor, please following the wiring diagram of weighing apparatus to connect the wire.

2. The place where marked E or En mean excitation power.