0-5V Amplifier

Descriptions

● 0-5V(10V)/ 4-20mA Load Cell sensor Amplifier Transmitter strain gauge transducer

● 0-5V&0-10V adjustable by switch /4 ~ 20mA 

● Load Cell sensor Amplifier Transmitter strain gauge transducer

Features

● 0~5V(10V) & 4~20mA can output at the same time;0~5V&0~10V is adjustable by switch(view the pictures).

● The built-in precision amplifier circuit, high precision, low temperature drift, long-term stability;

● Current and voltage output offer at the same time, choose through the terminal blocks;

● A wide range of power-supply modes

● Input overvoltage and overcurrent protection, output short circuit protection;

● Load capacity is strong, use with junction box, it can connect with more than one sensor;

● Apply to weighing, pull pressure, torque, etc. Various kinds of strain bridge type sensor

● The shell and cable connector waterproof design, tightness is good, applicable to various kinds of severe environment;

● Load capacity: 87Ω(can connect with 4pcs of 350Ω load cell sensor in parallel)

Specifications

● Input signal: Full bridge strain gauge/Load cell

● Bridge resistor: <2KΩ

● Sensitivity: 1.5~2.1mV/V

● Excitation voltage: 5V DC

● Excitation current :<100mA@12V supply; <50mA@24V supply

● Power supply: 12~26V DC vs. 0~5V output & 4~20mA output; 18~26V DC vs. 0~10V & 4~20mA output

● Linear: 0.3% 

● Temperature coefficient: 50ppm@10~30oC, 100ppm full work temperature range

● Operating temperature: 0~50 oC

● Dimension: 115mm×80mm×35mm (bolt center: 97mm)

Wiring

● ToLoad cell

1 - EXC+

2 - SIG +

3 - SIG-

4 - EXC-

5 - Shield

● Power supply & Output

6 - 12~26V DC

7 - Iout

8 - Vout

9 - Common

10 - Shield

Main Application

● Use to change the output mV weak signal of strain pressure transducer(such as weighing, pull pressure, torque sensor and so on) into universal standard analog signals as 4~20mA or 0~5V(10V).

Package Includes

● 1 x 0-5V(10V)/4-20mA Load Cell sensor Amplifier Transmitter strain gauge transducer