Welcome Customer !

Membership

Shanman Linyi Machinery Co., Ltd
Free Member ·1YRS
LinYi,ShanDong
Manufacturer

Main Products: Jaw Crusher|Cone Crusher|Hammer Crusher

Xwboo>Products

Shanman Linyi Machinery Co., LtdFree·1YRS

  • E-mail

    info@sandmancrusher.com

  • Phone

    865398706090

  • Address

    No.23 Yihe Road, Linyi City, Shandong Province, China

Contact Now

XS Series Sand Washing Machine

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Feed size: ≤ 10mmProduction capacity: 20-120t/hApplication field: Sand washing & Screening machine is commonly used in artificial sand production lineApplicable materials: widely used in the treatment of silica sand, river sand, yellow sand, sea sand, etc.Features: little sand loss during washingThe structure is ingenious, and the bucket wheel transmission device is above the water surface to avoid the damage of water and sand.
Product Details

XS series sand washing machine Product features and technical advantages

output size can be adjustable.png Less sand is lost during sand washing

output size can be adjustable.png The structure is ingenious, and the bucket wheel transmission device is above the water surface to avoid the damage of water and sand

output size can be adjustable.png The sand washing machine rotates smoothly and can be controlled by adjusting the loss of fine sand and stone powder to achieve good performance

output size can be adjustable.png High sand quality, large capacity, low power consumption and easy maintenance.

XS series sand washing machine introduction

Bucket wheel sand washing machine is a new type of sand washing machine developed by combining the actual situation and practical experience of the sand and gravel industry. This machine is widely used in aggregate washing operations to improve the quality of sand after removing mixed stone powder and debris.

XS series sand washing machine working principle and product display

When the sand washing machine is working, the power device drives the impeller to decelerate and rotate slowly through the V-belt, reducer, and gear. The sand and gravel materials enter the washing tank from the silo, and roll and grind each other under the drive of the impeller to remove the covering on the surface of the gravel. At the same time, it destroys the moisture layer on the sand grains to achieve the purpose of dehydration. At the same time, water is added to it to form a strong water flow, which will wash away the smaller proportion of impurities and foreign bodies in time, and discharge them from the overflow port to complete the washing process.

Wheel-type sand washer is a professional cleaning equipment for sand particles below 8mm. The structure is simple. The impeller drive bearing unit adopts water and water-proof materials to avoid damage to the bearing caused by water, sand and pollutants. In the work, there is very little waste of fine sand and stone powder. In addition, the screen has almost no vulnerable parts, has a long service life, and does not require maintenance for a long time.

sandman crusher show.jpg

XS series sand washing machine Technical parameters


sandman crusher sand washer price and specification.jpg

Remarks: 1. Our products are constantly updated and improved. Shanman reserves the right to change the parameters and design without prior notice to the user.

2. The above product configuration is not necessarily the factory standard configuration, please consult in detail when purchasing.

 

To design a suitable machine, please provide the following information:

1. What kind of stone do you want to crush? Like limestone? Or granite?

2. What is the size of your stone before crushing? How many inches or millimeters?

3. How much capacity do you need? 1t/h? 10t/h? 100t/h?

4. Do you only need a set of crusher or a complete crushing line? (Including feeders, crushers, screens, conveyors, etc.)

5. Do you need a station or a fixed production line?

You can learn more about sand making machine.