Welcome Customer !

Membership

Shanman Linyi Machinery Co., Ltd
Free Member ·1YRS
LinYi,ShanDong
Manufacturer

Main Products: Jaw Crusher|Cone Crusher|Hammer Crusher

Xwboo>Products

Shanman Linyi Machinery Co., LtdFree·1YRS

  • E-mail

    info@sandmancrusher.com

  • Phone

    865398706090

  • Address

    No.23 Yihe Road, Linyi City, Shandong Province, China

Contact Now

VSI Series Vsi Sand Making Mac

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Feed size: ≤ 50mmProduction capacity: 60-520t/hApplication areas: especially suitable for high-rise buildings, highway (railway) construction, and municipal engineeringApplicable materials: suitable for crushing various soft and medium hard ores and rocks, such as limestone, quartzite, river pebble, granite, etc.Features: Unique structure and stable operation.Low energy consumption, large capacity, and large crushing ratio.
Product Details

VSI Series Impact Sand Making Machine Product Features and Technical Advantages

output size can be adjustable.png Unique structure and stable operation.

output size can be adjustable.png Low energy consumption, large capacity, and large crushing ratio.

output size can be adjustable.png Perfect cubic product size and high bulk density.

output size can be adjustable.png Few spare parts, long service life and easy replacement.

 

VSI Series Impact Sand Making Machine Introduction

VSI sand making machine is a high-performance sand making equipment, which is widely used for fine crushing and coarse grinding of ore, cement, refractory materials, abrasives, glass raw materials, construction aggregates, artificial sand and various metallurgical slags.

 VSI series impact sand making machine Working principle and product display

1. Central feed: the raw materials fall into the feed hopper of the VSI sand making machine and enter the impeller from the central feed port. The materials are thrown out at a speed of 60-75 m/s under the action of the high-speed impeller. It is crushed when it hits the impact plate, and the final product comes out of the discharge port.

2. Annular feeding: the raw materials fall into the hopper, and the special plate divides the materials into two parts. Part of the material enters the impeller of the sand making machine through the center of the plate, and another part of the material falls from the outside of the plate. The material thrown out earlier crushes the material from the outside, so that the material is crushed and then crushed.

The spindle motor drives the transmission part of the bearing barrel to rotate at a high speed, while the rotor rotates at a high speed. As the spindle makes materials that enter the impeller, after the impeller is injected into the crushing cavity at high speed, the crushed lining materials collide with each other and form in the CuoMo cavity, which converts kinetic energy into energy. To accelerate the receiving of materials, crushed or plastic materials need to be circulated in the surrounding gas for many times under the vortex of the surrounding gas and then the materials in the crushing cavity are circulated for many times. Glue crushing realizes continuous crushing and discharges from the lower part of the machine body to form the required finished material. The crushing method is "stone-on-rock". This model is mainly used for plastic and crushed stone.

sandman sand making machine picture show.jpg

VSI Series Impact Sand Making Machine Technical Parameters

sandman sand making machine specification.jpg

Remarks: 1. Our products are constantly updated and improved. Shanman reserves the right to change the parameters and design without prior notice to the user.

2. The above product configuration is not necessarily the factory standard configuration, please consult in detail when purchasing.

 

To design a suitable machine, please provide the following information:

1. What kind of stone do you want to crush? Like limestone? Or granite?

2. What is the size of your stone before crushing? How many inches or millimeters?

3. How much capacity do you need? 1t/h? 10t/h? 100t/h?

4. Do you only need a set of crusher or a complete crushing line? (Including feeders, crushers, screens, conveyors, etc.)

5. Do you need a station or a fixed production line?

You can learn more about quarry related machine sand washer machine.