Welcome Customer !

Membership

Qingdao Yosion Intelligent Technology Co.,Ltd.
Free Member ·1YRS
QingDao,ShanDong
Manufacturer

Main Products: Laboratory equipments

Xwboo>Products
Product Categories

Qingdao Yosion Intelligent Technology Co.,Ltd.Free·1YRS

  • E-mail

    inquiry@yosionlab.com

  • Phone

    86-532-85166126

  • Address

    No. 4198, Sansha Road, Huangdao District, Qingdao, Shandong, China

Contact Now

Pulverising Mill Airbag Clamp 0044-0004

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Pulverising Mill Airbag Clamp 0044-0004 The air-bag is suitable for mill and millmate that requires a pneumatic supply rated at 700 kPa . The Mill and Millmate are both fitted with pneumatic regulators for the air-bag clamp (Mill) and air-bag lifter (Millmate). How to change Air-bag clamp :...
Product Details


product description

Pulverising Mill Airbag Clamp 0044-0004


The air-bag is suitable for mill and millmate that requires a pneumatic supply rated at 700 kPa. The Mill and Millmate are both fitted with pneumatic regulators for the air-bag clamp (Mill) and air-bag lifter (Millmate).


Operation Instructions


How to change Air-bag clamp :


Follow the steps and refer to the Figure below, if the air-bag clamp is not working.

 

Step 1

Check the air supply, lines and fittings for any faults, breaks, leaking or other damage.


 Step 2

Restore the air supply or replace any leaking or damaged lines or fittings as necessary.


 Step 3

To replace a faulty air-bag clamp, undo the air-line fitting on top of the clamp and undo the two (2) bolts holding the air-bag clamp to the Mill platform top arm.


 Step 4

Replace with a new air-bag clamp.

 

Note: Always use thread tape when installing any threaded air fittings.


Replacing the Air-bag Clamp


What to do if Millmate lifting arm not operating:


Follow the steps and refer to the Figure below, if the Millmate lifting arm is not operating.


Step 1

Check the air supply and all the air-lines and fittings supplying the air-bag and control buttons for leaks or breaks. Restore the air supply or replace any fittings or lines as necessary.


 Step 2

To replace a faulty air-bag, remove the two (2) bolts securing the air-bag, undo the air-line fitting and replace the air-bag with a new one.

 

Note: Always use thread tape on any threaded air-line fittings.

Replacing the Millmate Air-bag