Acid Fume Tower Acid mist scrubber is a new type of gas purification equipment. It is produced on the basis of the floating packing layer gas purifier. It is widely used in industrial waste gas purification, dust removal and other aspects of the pretreatment, purification effect is very good....
Product Details
Acid Fume Tower
Acid mist scrubber is a new type of gas purification equipment. It is produced on the basis of the floating packing layer gas purifier. It is widely used in industrial waste gas purification, dust removal and other aspects of the pretreatment, purification effect is very good.
Acid mist scrubbing tower uses the contact between gas and liquid, and transfers pollutants in gas to liquid, and then separates clean gas and polluted liquid to achieve the purpose of cleaning air. The waste gas is treated by gas-liquid reverse absorption through a packed acid mist scrubber, that is, the liquid is sprayed from the top of the tower in the form of mist (or small droplets), and the waste gas flows up from the bottom of the tower to achieve the purpose of gas-liquid contact. This treatment method can cool the waste gas, absorb the waste gas and remove the particles. After being treated in the demisting section, the clean air is discharged into the atmosphere.
The acid mist scrubbing tower consists of body, filling layer, demisting layer, circulating sprinkling pipeline and circulating water tank.
Applicable objects: electronic industry, semiconductor manufacturing industry, PCB manufacturing industry, LCD manufacturing industry, steel and metal industry, electroplating and metal surface treatment industry, pickling process, dye / pharmaceutical / chemical industry, deodorization / combustion waste gas Sox / NOx removal, other water-soluble air pollution.
The material of this product is made of PP series polyacrylonitrile, which has the advantages of corrosion resistance, antifreeze cracking, wear resistance, high strength and good toughness.
According to the customer's requirements, flame retardant components can be added into PP polypropylene material to make PP Flame retardant material, so that the PP board can achieve the effect of self extinguishing.
The product has the advantages of simple installation, long service life and reliable connection performance.
1. The neutralization tower body contains the exhaust gas inlet, outlet, window, maintenance hole and the structure inside the scrubber for support and fixation, so as to ensure the corrosion resistance of the equipment itself and increase its service life. 2. The ∮ 75pp lacing ring is used as the filling layer. The ∮ 75 PP Raschig ring has the characteristics of large specific surface area, low pressure loss and low material transfer height. Compared with other filling materials ∮ 75 PP Raschig ring has the advantages of higher treatment efficiency and lower operation cost. 3. The ∮ 50 PP hollow ball is used as the demisting layer. 4. The material of circulating sprinkler pipe is PP, and the nozzle is spiral type PP atomizing nozzle. In order to increase the liquid gas contact surface, a large number of multi-faceted hollow balls are arranged in the spray layer. This kind of nozzle is not easy to block, spray angle is large, and the droplet distribution is uniform, so that the washing tower can play the best treatment effect. 5. The circulating water tank is connected with the washing tower body, with a capacity of 2-3 minutes of circulating water. The floating ball liquid level controller is set inside the water tank, and the washing water inlet overflow port and discharge port are reserved.