Main ingredients: alumina (45-55%), silica.1. It can heat up to 1200 degrees Celsius.2. Suitable for melting samples of acidic substances such as K2S2O7.
Product Details
Ceramic Crucible
Main ingredients: alumina (45-55%), silica.
1. It can heat up to 1200 degrees Celsius.
2. Suitable for melting samples of acidic substances such as K2S2O7.
3. Generally, it cannot be used for melting with alkaline substances such as NaOH, Na2O2, Na2CO3, etc., to avoid corrosion of the porcelain crucible. Porcelain crucible should not be in contact with hydrofluoric acid.
4. Porcelain crucibles can generally be cleaned by boiling with dilute HCl.
5. Porcelain crucibles can be divided into: middle-wall crucible, low-wall crucible, high-wall crucible, plain crucible, volatile crucible, tight crucible, Roca crucible, double-layer crucible, ancient crucible, fine hole crucible, infrared carbon-sulfur crucible, Free expansion coefficient crucible, etc.
6. Ceramic has water absorption. Therefore, in order to reduce errors, the crucible should be strictly dried before being used and weighed on an analytical balance. Sometimes the analytes are filtered with ash-free filter paper, and the filter paper is put into the crucible together; this kind of filter paper is completely decomposed in a high temperature environment and will not affect the results. After high temperature treatment, the crucible and its contents are dried and cooled in a special dryer, and then weighed. Clamp it with clean crucible tongs throughout.
1. High temperature resistance
2. Acid resistance
3. Suitable for melting and refining metal liquid and solid heating and reaction.
4. The models are complete and the cover can be purchased separately.
5. Porcelain is a material made of kaolin. The utensils are more delicate and harder than pottery. The pottery is heated by adding fire to the pottery temperature, and the pottery becomes porcelain.
6. It is used for heating experiment in combination with alcohol lamp, tripod and mud triangle.
Scope of application: special standard crucible for industrial analysis and testing of coal. It is mainly used to measure the volatile and ash content of coal, cement, black raw meal, biofuels and other substances. It is a standard consumable for industrial analyzers, muffle furnaces and other instruments.
Note for use: After receiving the goods, the crucible should be dried in a drying oven or muffle furnace at 150°C for 30 minutes, and placed in a drying tower for use after drying.