Portable Dust Collector The portable dust collector is mainly used for the collection of suspended dust and particles. Whether it is used for air pollution control or as a part of the production process, it can ensure efficient and continuous online dust collection. The machine has...
Product Details
Portable Dust Collector
The portable dust collector is mainly used for the collection of suspended dust and particles. Whether it is used for air pollution control or as a part of the production process, it can ensure efficient and continuous online dust collection. The machine has the advantages of stable operation, large air volume, small size, and convenient maintenance.
It is widely used in industries such as chemical industry, electronics, metal processing, tobacco, glass, pharmacy, food processing, clean room, hospital and other places polluted by dust and smog.
Under the premise of ensuring that no secondary pollution will occur, workshop operations will not be affected, and equipment life will not be affected, a multi-stage purification device is used to process dust.
Model
YDCH-42
Air Volume
3500m³/h
Voltage
220V/60HZ
Power
2.2kw
Processing granularity
0.3 microns or less
Processing modle
Filter cartridge
Filter Area
14 ㎡
Size
660x660x1320mm
1. Installation method: 1.1 The product can be placed directly on the flat ground for use.
2.2 Reserve at least 400mm spacing around the equipment to facilitate equipment operation and maintenance. Please do not place it in a low-lying place with water or humidity to avoid rusting and corrosion of the equipment.
2. Maintenance method: 2.1 Before servicing any electrical components, you must cut off the power supply, shut off the air source, and drain the compressed air pipe. Electric welding is not allowed in the machine body without fire prevention measures. 2.2 Perform a major inspection of the equipment every month, including components such as bearings, motors, and electrical components.
2.3 When the equipment is not used for a long time, please pay attention to moisture and dust.
3 matters needing attention 3.1 Due to the potential danger of fire accidents caused by sparks in the dust collector, it is necessary to avoid combustible materials such as polishing flannel, paper, wood, dust and magnesium powder and the dust generated by ferrous metals during the grinding process Phase mix. 3.2 Under any circumstances, equipment operators are not allowed to throw unextinguished cigarettes or other burning objects into the dust control suction hood or duct.