Welcome Customer !

Membership

Qingdao Yosion Intelligent Technology Co.,Ltd.
Free Member ·1YRS
QingDao,ShanDong
Manufacturer

Main Products: Laboratory equipments

Xwboo>Products
Product Categories

Qingdao Yosion Intelligent Technology Co.,Ltd.Free·1YRS

  • E-mail

    inquiry@yosionlab.com

  • Phone

    86-532-85166126

  • Address

    No. 4198, Sansha Road, Huangdao District, Qingdao, Shandong, China

Contact Now

Automatic Iron Pellet Strength Tester

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Automatic Iron Pellet Strength Tester The automatic pellet press is an automatic equipment for testing the strength of pellets and sinters. It adopts a servo control system. The product complies with GB/T14201-2018 Blast furnace and direct reduction iron pellets compressive strength...
Product Details

Introduction

Automatic Iron Pellet Strength Tester


The automatic pellet press is an automatic equipment for testing the strength of pellets and sinters. It adopts a servo control system. The product complies with GB/T14201-2018 "Blast furnace and direct reduction iron pellets compressive strength Determination", ISO4700 and other standards for testing. Applicable to: Iron and Steel Metallurgy, Pellet Mining, University/Research Institute, Entry-Exit Inspection and Quarantine Bureau.


Features

· The pellet crushing device adopts a servo control system, which can adjust a fixed speed at a constant speed between 10mm/min~20mm/min during the whole test. The national standard recommends 15mm/min±1mm/min to make the test data more Accuracy helps to ensure the sample pass rate and reproducibility. The servo control system can be used continuously and efficiently for a long time with good stability.
· When the equipment meets any of the following conditions, the test ends and the maximum load compressive strength value is obtained during the test. (A) The load drops to 50% of the recorded maximum load value, or appears to be higher than the recorded maximum load; (b) The distance between the press plates drops to 50% of the initial average particle size of the sample.
· Electric magnetic vibrating plate automatic feeding device, pellet crushing and automatic feeding are carried out simultaneously, saving test time;
· Rotary automatic cleaning device, without manual cleaning, automatically completes the cleaning of waste pellets;
· During the test, the test data is displayed in real time, including: each pellet crushing force value, maximum value, minimum value, average value, relative frequency distribution, and pressure curve diagram;
· Long-term storage of test data, historical test data can be inquired in different ways, and test reports can be printed;

·The equipment has a pressure overload protection system to prevent damage to the sensor due to misoperation;


Technical Parameter

Model

YX-PT1000S

Application

Crush the pellets, test pellet strength

Test efficiency

60 pellets takes about 30 minutes

Maximum number of pellets once

120

Platen speed

10-20mm/min

Pellet size

Φ10mm~16mm

Sensor maximum pressure

10KN or 15KN(≥1019.7kgf)

Sensor accuracy

C3(≥0.03%)

Sensor error

≤±0.020%FS

Transmitter accuracy

≥0.1%F·S

Transmitter protection level

IP65

Voltage

AC 220V±5%,50Hz

Power

0.75KW

Weight

120kg

Packing and Transport

Host
A8-PT1000S
Touch screen
7 inch
Computer

Printer

Software

Sensor
10KN (about ≥1019.7kgf) ,Accuracy: C3 (not less than 0.03%)
TransmitterAccuracy: better than 0.1% F·S
Protection grade IP65
Automatic loading device

Vibration plate
Magnetic vibration
Automatic cleaning waste material device
Rotating disc rotation cleaning
Automatic crushing device
servo motor