Welcome Customer !

Membership

Jiuyin Science and Technology Chengdu Co., Ltd.
Free Member ·1YRS
ChengDou,SiChuan
Manufacturer

Main Products: Oxygen Nitrogen Analyzer (Oxygen Nitrogen Hydrogen Analyzer)|Automobile Exhaust Gas Analyzer

Xwboo>Products

Jiuyin Science and Technology Chengdu Co., Ltd.Free·1YRS

  • E-mail

    sales@meas-elec.com,service@meas-elec.com

  • Phone

    028-85044052/028-85044053

  • Address

    4th floor, unit 1, building 4, District D, West Zhigu, 66, Wuxing 4th Road, Wuhou District, Chengdu City, Sichuan Province

Contact Now

HT-LA416 Trace Oxygen Analyzer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Micro oxygen analyzer
Place of Origin
City, Province
Overview
HT-LA416 Trace Oxygen Analyzer
Product Details

    Measurement Principle: Fuel cell

    Display Mode: 320×240 dot matrix color LCD

    Measurement Range: 0~10/100/1000PPm O2 (trace)

    0~10%/21%/25%/99% O2 (normal)

    Measurement Accuracy: 0~1000PPm/10%/21%/25%/99%≤±1%FS

    0~100PPm≤±2%FS

    0~10PPm≤±5%FS

    Minimum Resolution: 0.1PPm (trace)

    0.01% (normal)

    Repeatability: ≤±1.0%FS

    Response Time: T90≤60S (trace)

    T90≤40S (normal)

    Output Port: 4-20mA (Non-isolated output, load resistance<1KΩ)

    0-10V.DC (Non-isolated output, load resistance>10KΩ)

    1 way of programmable alarm output (Dry contact type, maximum load 220V/2A)

    2 ways of instrument status signal output

    Communication Mode: RS232 (default) or RS485

    Power Supply: AC85~264V 50/60Hz, power dissipation<25VA

    Environment Temperature: --10℃~+50℃

    Storage Environment Humidity: <90%RH, non-condensing

    Operation Environment Humidity: <100%RH, non-condensing

    Sample Gas Temperature: 0℃~40℃

    Sampling Mode: Gas in or extraction sampling (please indicate sampling mode when ordering)

    Sample Gas Flow: 400~600mL/min

    Gas Inlet Pressure: Gas in: 5Kpa≤ relative pressure≤100Kpa (relief valve is recommended if the pressure >100Kpa)

    Extraction sampling: -10Kpa≤ relative pressure ≤5Kpa(please indicate the specific negative pressure value when ordering if the pressure<5Kpa since it will decide the gas circuit structure)

    Gas Outlet Pressure: Free venting (under safe conditions)

    Background Gas: N2 or inert, acid and reducing gas, etc.

    Size: 176mm×251mm×302mm (H×W×D)

    Hole-Cutting Size: 178mm×212mm (H×W) (in embedded mounting)

    Sensor Service Life: >24 months (under normal conditions of use)

    Gas Circuit Port: NPT 1/8 internal thread

    Instrument Weight: Net weight 5.0Kg

    Installation Method: Embedded mounting / counter mounting



    a. Menu can be switched between Chinese and English and the operation is intuitive and convenient;

    b. 320×240 graphic dot-matrix color LCD display is clear to see;

    c. The original imported fuel cell sensor has a high measurement accuracy, rapid response speed, long calibration cycle and strong anti-interference capability, etc.;

    d. With the gas circuit blockage alarm and self-protection function, the instrument could turn off the sampling pump automatically when the gas circuit malfunctions, which could extend the service life of sampling pump and sensor;

    e. Outrange protection function could cut off the gas circuit automatically when the oxygen concentration is higher than the protection concentration level, preventing damaging the sensor because of exposing the sensor to high-oxygen-concentration environment for too long;

    f. Automatic temperature compensation function could reduce the impact of environmental temperature changes on the measurement accuracy;

    g. The instrument allows multi-point fractional liner calibration, meeting the need for an accurate measurement of oxygen content among the full range;

    h. 40 thousand pieces of historical data can be stored locally automatically and can be read at any time;

    i. Original imported sampling pump (extraction sampling) is built in and has a long service life and stable performance;

    j. RS232 (default) or RS485 digital communication port can be selected according to clients’ requirement, to realize unidirectional or bidirectional communication with computer or other digital communication facilities.



    It can be widely used in the online oxygen concentration analysis in protection gas furnace, such as high-temperature sintering furnace of magnetic material and brazing furnace, protection gas furnace of electric semiconductor industry and glass conditioning industry.



    Measurement range

    Measured gas pressure

    Background gas composition

    Similar Product Recommend