ChangSha，HuNan-
E-mail
info@csppm.com
-
Phone
86-731-82561520
-
Address
4F, Block A, Building 7, International Corporate Center, No. 188, Middle Huanbao Road
Product Categories
- Digital Process Indicator
- Load Cell Sensor
- TPMS Tire Pressure Sensors
- Wireless Pressure Sensor
- Explosion Proof Pressure Sensor
- Engine Oil Quality Sensor
- Oil Moisture Sensor
- Liquid Level Sensors
- Differential Pressure Transducers
- Temperature Transmitter Sensor
- Pressure Transmitter Sensor
- Industrial Automation Sensor
Changsha Taihe Electronic Equipment Co., Ltd.Free·1YRS
PPM 127E Input Type 200m Liquid Level Sensors For Sewage Treatment
NegotiableUpdate on September 11
- Model
- Nature of the Manufacturer
- Manufacturer
- Product Category
- Liquid Level Sensors
- Place of Origin
- City, Province
Overview
PPM 127E Input Type 200m Liquid Level Sensors For Sewage Treatment
Product Details
PPM 127E Input Type 200m Liquid Level Sensors For Sewage Treatment
Description| Measuring Range: | 0 ～ 0.5m, 1m, 2m, 3m, 5m, 10m, 15m ... 200m | Overload Capacity: | 300% |
|---|---|---|---|
| Power Supply Range: | 12 ～ 36VDC | Signal Output:: | 4 ～ 20mA（two Wire）, Digital Signal: RS485（four Wire） |
| Accuracy: | 0.075% FS, 0.1% FS, 0.2% FS, 0.5% FS (including Non-linear, Repetitive, Hysteresis) | Resolution: | 0.01% FS |
| Working Medium Temperature: | -30 ～ + 80 ℃ High-temperature Type Customization (-20 ～ + 150 ℃ / 250 ℃) | Working Environment Temperature: | -30 ～ + 70 ℃ |
| Protection Class: | IP68 | Interface And Housing: | Stainless Steel 1Cr18Ni9Ti |
| High Light: | PPM 127E Liquid Level Sensors,200m Liquid Level Sensors,200m Liquid Level Measurement | ||
0 ～ 200m PPM-127E Sewage Treatment Systems Input Type Liquid Level Transmitter
Product Introduction:
The PPM-127E input type liquid level transmitter uses digital technology to collect real-time liquid level and temperature signals on the spot. After the CPU performs calculation compensation and parameter correction, it is converted by the D / A circuit into a high-precision two-wire system 4 ～ 20mA analog The signal and RS485 digital interface signal ensure the high precision and high reliability of the product. The level transmitter's zero point, full scale, unit, address and other parameters are open to users, so that when users need to adjust the product, or need to monitor multiple products at the same time, through RS485 interface and dedicated data cables and software , Perform on-site pressureless calibration and adjustment. This series offers customized services.
Applications :
Seepage level measurement for constant pressure water supply, water storage, drainage, sewage treatment systems, urban groundwater, lakes, reservoirs, dams, open oil tanks, circulating water, water towers, coolants, etc.
Technical Parameters :
| Measuring range: | 0 ～ 0.5m, 1m, 2m, 3m, 5m, 10m, 15m ... 200m |
| Overload capacity : | 300% |
| Power supply range: | 12 ～ 36VDC |
| Signal output: | 4 ～ 20mA(two wire), digital signal: RS485(four wire) |
| Accuracy : | 0.075% FS, 0.1% FS, 0.2% FS, 0.5% FS (including non-linear, repetitive, hysteresis) |
| Resolution : | 0.01% FS |
| Working medium temperature: | -30 ～ + 80 ℃ High-temperature type customization (-20 ～ + 150 ℃ / 250 ℃) |
| Working environment temperature: | -30 ～ + 70 ℃ |
| Protection class : | IP68 |
| Interface and housing : | Stainless steel 1Cr18Ni9Ti |
| Sensor diaphragm: | 316L stainless steel, 96% alumina ceramic |
| Seals: | All-in-one stainless steel construction, no plastic seals |
| Cable: | Φ7.5mm polyethylene (or polyurethane) air conducting cable |
| Installation method: | input |
Definition of wiring:
| Direct outgoing | |||
| 2-wire system | 4-wire system | ||
| Power supply | Red | Red |
| Negative power | Black | Black | |
| A | 一 | Green | |
| B | White | ||
Dimensions in mm :
Similar Product Recommend