CDZ6150 Light Type Conventional Lathe

NegotiableUpdate on September 14

Model

Nature of the Manufacturer: Manufacturer

Product Category: Conventional Engine Lathe

Place of Origin: City, Province

Online Consult Contact Information

Overview

CDZ series is Light Type Conventional Lathe used for machining various kinds of steel parts. It is light type to our factory, but it is heavy than other same specification lathe.

Product Details

CDZ series is Light Type Conventional Lathe used for machining various kinds of steel parts.

It is light type to our factory, but it is heavy than other same specification lathe.

our casting parts adopt high quality resin sand, casting export to many famous machine tool ,such as Mori Seiki， Mazak etc

This machine is especially suitable for strong force cutting, rough machining, mass production of machining inside and outside cylinder surface, end surface, metric，inch，module, and pitch thread etc. It can also perform the function of drilling and boring hole.

Main features

1. Dynamic sliding bearing is adopted on spindle nose. it is traditional ,but very strong force type. if you need strong force cutting, this is good choice. The sliding bearings have better precision and obtained state patent.

2. The spindle has 24 manual speed grade. The speed rang of spindle is 12-1000 r/min.

3. The lathes are supplied with two systems both in metric and in inch.

4.Special accessories（Chasing dial device，taper turning attachment）are supplied.

5. Electric system of different frequency and voltage can be designed to meet the requirements of users.

Technology Parameter and Accessory

Specification		Models CDZ6150
Capacity	Max. swing diameter over bed	Ф500mm
	Max. swing diameter over cross slide	Ф300mm
	Max. swing diameter over gap	Ф760mm
	Width of bed	400mm
	Center distance	3000mm
	Max cutting length	800 mm
Spindle	Spindle nose	C 6
	Spindle bore diameter	Ф52mm
	Taper of spindle bore	Morse No.6
	Range of spindle speed	12-1000r/min 24Kinds
Feeds	Longitudinal feeds range	0.082-1.586mm/r 35Kinds
	Transversal feeds range	0.027-0.529mm/r 35Kinds
	Metric threads range	1-192mm 57Kinds
	Inch threads range	2-24tooth/inch 30Kinds
	Module threads range	0.25-48mm 40Kinds
	Pitch threads range	1-96tooth/inch 37Kinds
Tailstock	Taper of tailstock sleeve	Morse No. 5
	Travel of tailstock sleeve	150mm
	Diameter of tailstock sleeve	Ф75mm
Motors	Main motor power	7.5kW
	Rapid motor power	0.25kW
	Coolant pump power	0.125kW

Light Type Conventional Lathe

Light Type Conventional Lathe Machine

Standard configuration

1. φ250 three jaw chuck / One set

3. center bush / One set

3. center / One set

4. Oil gun / One set

5. Tools / One set

6. Foundation screws / One set

Optional

1. Flate Plate / One set

2. Drive plate / One set

3. Steady restф20-ф130 / One set

4. following restф20-ф80 / One set

Document

operational manual( chinese one set and english one set, include packing list and certificate of acceptance)

Over All Dimensions and Weight

Model Length	CDZ6150 / CDZ6250
Model Length	Floor space L×W×H	Packing dimension L×W×H	Net weight	Gross weight
500	2116×1069×1277	2450×1140×1720	2270	2340
1000	2586×1069×1277	2920×1140×1720	2420	2520
1500	3106×1069×1277	3440×1140×1720	2570	2700
2000	3606×1069×1277	3940×1140×1720	2870	3020
3000	4586×1069×1277	4920×1140×1720	3220	3340