CKD6163D Series CNC Lathe Machine 3Tons Load

NegotiableUpdate on September 14

Model

Nature of the Manufacturer: Manufacturer

Product Category: CNC Horizontal Lathe

Place of Origin: City, Province

Online Consult Contact Information

Overview

CKD6163D Series CNC Lathe Machine 3Tons Load is CNC lathe used for machining various kinds of steel parts. It is specially suitable for mass production of machining inside and outside cylinder surface, end surface, metric and inch thread etc. It can also perform the function of drilling and boring hole.

Product Details

CKD6163D Series CNC Lathe Machine 3Tons Load

CNC Lathe Machine 3Tons Load

Main features

1) Main spindle speed is infinite of varies speed so as to realize change speed without stop spindle. Speed range is wide and suitable for rough and finish turning.

2) The bed is made of high strength resin cast iron, the guide-way is hardened by ultra-high frequency quench and precision ground with properties of good precision-keeping and strong loading capacity.

3) It is adopted high power low noise servo motor, so the machine has high positioning accuracy, good stability and high reliability.

4) The machine is equipped four-position automatic rotary turret with intermittent automatic lubrication which the user can adjust according to the condition. It fully guarantee the rail surface lubrication and improve the accuracy of machine effectively.

5) The machine has double door and semi protective structure, so it has beautiful shape and easy to operate.

Specification

Machine Tool Parameter
The Max. Swing Diameter Over Bed	φ 630mm
The Max Swing Diameter Over Cross Slide	φ 350mm
The Max Distance Between Centers	2000 mm
Max Workpiece Turning Length	1850 mm
Bed width	600mm
Max Bearing Weight Between Two Center	3t
Guide Heatment Hardness	Hrc50
Spindle Parameter
Spindle Center Height	320mm
The Speed of Spindle Manual Four Level And, Stepless Speed in Four Levels	17-1000 R/min （Ⅰ：17-100r/min、Ⅱ：35-225r/min、Ⅲ：74-450r/min Ⅳ：180-1000r/min
The Diameter of Spindle	φ100mm
The Taper of Spindle Front Hole	metric 120
The Typer of Spindle Nose	c 11
The Power of Main Motor(china Domestic Servo Motor)	15kw
Feed
X Axis Rapid Movement Speed	4000mm/min
Z Axis Rapid Movement Speed	6000mm/min
X Axis Travel	450mm
X-axis Feed Motor	11n.m(siemens)
Z-axis Feed Motor.	22n.m(siemens)
Smallest Unit of Tool Post	X Axis 0.001 Z Axis 0.001
Tool post
Tool Post	Vertical 4position Tool Post
Model	ak21240x4
The Section Of Tool	32×32mm
Tool Post Repeat Position Accuracy	0.01mm
Tail stock
The Diameter of Tailstock Sleeve	φ120mm
The Max.travel of Tailstock Spindl	200mm
The Taper of Tailstock Sleeve	Morse 6#
Cooling and Lubrication
Cooling Pump Model	Jcb-45
Lubrication Form	intermittent Automatic Lubrication
Lubrication Station Volume	1.5l
Other
Form of Cover Protection	Double Sliding Door, Semi-closed Protection

Configration
Workpiece Loads Weight	3tons, 600mm Bed Width
Workpiece Loads Weight	With Simenes 808
Standard Configuration	CKD6163D
with Manual Three-jaw Chuck φ380mm	1set
Steady Rest 50-300mm	1set
Follow Rest50-150mm	1set
Center Sleeve	1set
Morse 6# Center	2set
Oil Gun	1pcs
Tools	1set
Foundation Screws	1set

Commodity and Specification

Change to simens828 system

Face plate

Drive plate

Chip remove machine

Hydraulic chuck, taiwan 15" middle solid

Hydraulic chuck, taiwan 15" middle hollow

Hydaulic tailstock, rotating center

Hydaulic tailstock, no rotating center

Document with Machine for One Machine Tool

Content	Document	Number	Note
1	Operational manuals	1	Mechanical and electrical
2	Acceptance of certificate	1
3	Packing list	1