BL-S36/36T ■ TAIWAN technology, ■ 6’’ chuck, ■ Gang tool/8T tool turret■ Without tailstock
■ S36 mount gang tool device, S36T mount 8 station HYDRAULIC-SERVO tool turret. ■ Super compact structure, big inside space, modern appearance ■ Adopt TAIWAN technology, designed by TAIWAN engineer, most parts adopt GERMANY/JAPAN/TAIWAN brand.■ Bed adopt flat bed, slide board adopt 30°slant design(structure similar as JAPAN TSUGAMI M06/08), high rigidity, good machining flexibility, easy for chip conveying■ Adopt modularization design, has strong extended function, easy for various especial configuration choice, such as tool setter, robot etc.■ Adopt HT300 resin sand cast iron, after aging treatment and FEA analysis, small distortion, good torsional strength, good heat stability. ■ Frame adopt oil-coolant separation design, adopt independent coolant tank ■ Adopt high precision integral spindle unit, spindle motor adopt high performance servo motor, big output torque,high speed,wide adjustment range■ Adopt high precision pre-stretched ball screw(double nuts), coupled with feeding motor directly by linkager, no gap,high transmission rigidity, can realize μ class precise turning. ■ Adopt high precision wide linear guideway, high rigidity and long using lifespan, fast moving speed, good accuracy holding, suitable for precise machining■ For S36T, mount energy-storage tank,reduce pressure fluctuation during tool change ■ Can mount right-setting or back-setting chip conveyor
Item | Specification | Unit | BL-S36 | BL-S36T |
Capacity | Chuck size | / | 6’’ |
Max. swing dia. over bed | mm | Φ460 |
Max. swing dia. over slide | mm | Φ130 | Φ265 |
Max. turning length | mm | 330 | 260 |
Max. turning dia. |
| Φ300 | Φ320 |
Spindle | Spindle bore | mm | Φ56 |
Spindle end type | / | A2-5 |
Spindle speed | rpm | 5000 |
Max. bar through dia. | mm | Φ44 |
Spindle motor power | kw | 5.5 |
X/Z axes | X axes travel | mm | 350 | 160+20 |
Z axes effective travel | mm | 350 | 300 |
X/Z axes motor | Nm | 6/6 |
X/Z axes rapid moving speed | m/min | 28 |
X/Z axes ball screw dia./pitch | mm | 32/12 |
X/Z axes linear guideway width | mm | 30/35 |
Tool turret | Tool turret type | / | Gang tool | Hydraulic-servo tool turret |
Tool qty | / | 5 | 8 |
Vicinal tool changing time | s | / | 0.4 |
Farthest tool changing time | s | / | 0.57 |
Toolshank size | mm | 20×20, Φ32 |
Tailstock | Tailstock | / | N/A |
Accuracy | Ex-circle finish turning accuracy | / | IT6 |
Finish turning roughness | mm | Ra0.4~1.6 |
Finish turning roundness | mm | ≤0.003 |
Positioning accuracy(X/Z) | mm | 0.005/0.008 |
Repeat positioning accuracy(X/Z) | mm | 0.002/0.004 |
Others | Coolant pump power | w | 480 |
Coolant flow | m³/h | 2.5 |
Overall size | mm | 1650×1600×1550/2450×1600×1550 (exclude/include chip conveyor) |
N.W. | kg | 2300 | 2400 |
Item | Brand |
CNC controller | GERMANY-SIEMENS |
X,Z axes driver&motor | GERMANY-SIEMENS |
Spindle driver&motor | GERMANY-SIEMENS |
Spindle unit | TAIWAN-VOLIS/KENTURN |
Ball screw | TAIWAN-PMI/HIWIN |
Ball screw bearing | JAPAN-NSK/NTN |
Linear guideway | TAIWAN PMI/HIWIN |
Tool turret | GERMANY-SAUTER/INDIA PRAGATI |
Lubrication system | TAIWAN-ISHAN |
Rotary oil cylinder&chuck | TAIWAN-AUTOGRIP |
Hydraulic parts | TAIWAN/JAPAN |
Coolant pump | Joint-venture |
MPG | USA-HEDSS |
Tri-color indication lamp | KOREA-QLIGHT |
Breaker | FRANCE-SCHNEIDER |
AC contactor | FRANCE-SCHNEIDER |
Relay | JAPAN-OMRON |
DC switch power supply | TAIWAN-MEANWELL |
Terminal block | GERMANY-WEIDMULLER |
Synchronous belt | USA-GATES |
Synchronous belt wheel | TAIWAN-PTP |
Nuts | TAIWAN-YINSH |
Shaft coulping | GERMANY-KTR/R+W |
Scrapping plate Extensible cover | TAIWAN-WANHE |
Chip conveyor&chip bucket | TAIWAN-WANHE |
Coolant pipe | TAIWAN-WEIDING |
Standard configuration:
●SIEMENS 808D ADVANCED CNC controller
●Hydraulic chuck
●Gang tool(S36)/8 station Hydraulic-servo tool turret(S36T)
Optional configuration:
●SIEMENS 828D/FANUC 0i TF CNC controller
●Automatic chip conveyor
●Tool setting probe