Welcome Customer !

Membership

DEYI Equipment Industries Limited
Free Member ·1YRS
,Hongkong
Manufacturer

Main Products: Steel Pipe|Diaphragm Pump|Other Pipe Fittings|Elbow

Xwboo>Products

Sanitary Stainless Steel Clamped Butterfly Valve With Multi-Position Handle

Model
DY-BFV-C1
Nature of the Manufacturer
Manufacturer
Product Category
Sanitary Butterfly Valve
Place of Origin
City, Province
Overview
Our Butterfly valve body could be offered with weld end, male end, female end and clamp end.
Product Details

Application

Our Butterfly valve body could be offered with Weld end, Male end, female end, and Clamp end. Our butterfly valves can be installing with different type handles like 4 position pull handle, 12 position gripper handle and 10 more other types or installing with actuator for automatically control for your widely using.

Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meet the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity The Butterfly valve body and disk are all made from full CNC machined, high grade level polish.

All of the products have been 99% press tested before shipping.

It is necessary you specify at the time when orders be placing if heat numbers and MTR's are required.
EPDM, Silicon and Viton seats are available for installing in our butterfly valves which are suitable for many applications in such as food, dairy, beverage, meat processing, chemical, and many other industries

Design features And Parameters

Product Wetted Steel PartsAISI304/AISI316LProvided with material inspection report
Other Steel PartsAISI304
Size1/2"~6",DN10~DN150
Seal materialEPDM/VMQ/FPM 
Working pressure≤10bar(145psi)
Working temperaturePDM:-14~248ºF(-10~120ºC)
VMQ:-58~356ºF(-50~180ºC)
FPM:22~446ºF(-30~230ºC)
Other materials are avaible upon request
Sterilization temperature302ºF(150ºC,max 20min)
Outside surface treatmentRa16~32uin(o.4~0.8um)
nside surface treatmentRa32~64uin(o.8~1.6um)
Connetion endsbutt-weld,clamped ends,male ends, flange ends
neumatic headNormally closed(NC)-Air to open,spring to close
Normally open(NO)-Air to close,spring to open
Air to air(AA)-Air to open,air to close
Similar Product Recommend