-
E-mail
Carlwhite@Abitdrill.Com
- Phone
-
Address
No. 95-2, Blacksmith Road, Hunnan District, Shenyang, Liaoning
Membership
Help
Anbit Drilling Equipment Co., Ltd.Free·1YRS
Carlwhite@Abitdrill.Com
No. 95-2, Blacksmith Road, Hunnan District, Shenyang, Liaoning
1. The strong energy of single impact and the low energy consumption in rock crushing;
2. The weight ratio of Piston and Bit almost Reaches 1:1 to provide long effective acting time, which leads to the improved efficiency in rock crushing and the extended service life of the drilling tool;
3. A good performance in central air exhaust and cuttings discharge, which reduces the repeated crushing of rock;
4. A check valve device is available to drill holes finder water.
The ANBIT Series DTH Hammer, an ideal drilling tool, is widely used in such industries relating to energy, transportation, metallurgy, building etc.
| Length | 870(mm) | ||
| Connection Thread | F48x10 PIN | ||
| External Diameter | 82(mm) | ||
| Weight | 24(KG) | ||
| Hole Range | 90-120(mm) | ||
| Working Pressure | 10-13(Bar) | ||
| Air Consumption | 8-10(m³/min) | ||
| dirll Tail rod | CIR90/M3 | ||
| 1、Connection | ANBIT3-01 | 9、Reed spring | ANBIT3-09 |
| 2、O type ring | ANBIT3-02 | 10、Guide sleeve | ANBIT3-10 |
| 3、top | ANBIT3-03 | 11、"O"ring | ANBIT3-11 |
| 4、check valve | ANBIT3-04 | 12、front top sub | ANBIT3-12 |
| 5、spring | ANBIT3-05 | 13、stop ring | ANBIT3-13 |
| 6、valve seat | ANBIT3-06 | 12、front top sub | ANBIT3-14 |
| 7、Cylinder | ANBIT3-07 | 15、outer tube | ANBIT3-15 |
| 8、piston | ANBIT3-08 |