Welcome Customer !

Membership

Anbit Drilling Equipment Co., Ltd.
Free Member ·1YRS
ShenYang,LiaoNing
Manufacturer

Main Products: Air Compressor

Xwboo>Products

Anbit Drilling Equipment Co., Ltd.Free·1YRS

  • E-mail

    Carlwhite@Abitdrill.Com

  • Phone

  • Address

    No. 95-2, Blacksmith Road, Hunnan District, Shenyang, Liaoning

Contact Now

NRC Reverse Circulation Hammer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Hammer
Place of Origin
City, Province
Overview
NRC Reverse Circulation Hammer
Product Details
Advantages Of NRC Reverse Circulation Hammer:

1. According to the previous experience of ordinary percussion equipment, combined with the trial characteristics of the counter-circulation impactor, optimize the internal structure to make the ability transfer ideal, so as to guarantee the fast drilling speed of this series of impactor and the steady continuous sampling.
2. The internal structure is very simple and the parts are rigid, which ensures long life of the impactor and easy maintenance.
3. The acquisition pipe is one-piece, which can be replaced without removing the impactor.
The acquisition pipe is carburized, so it has good wear resistance.
4. The matching bit adopts the patented design, only the bit needs to be replaced, the same impactor can drill holes of different sizes, and the sample can be guaranteed free from contamination.
5. Under various difficult conditions such as loose soil, hard rock and plenty of water, the sampling work can be completed well.

 

Specification Of NRC Reverse Circulation Hammer
Item DescriptionWeight(kg)
NRC45NRC55NRC65NRC52
1、Internal Ciclip0.030.040.050.04
2、Air Screen0.350.440.650.44
3、Top Sub6.59.65209.65
4、“O"Ring0.010.020.020.02
5、Sample Tube5.16.7212.56.75
6、Check Valve0.250.680.850.68
7、Spring0.040.120.10.12
8、“O"Ring0.010.020.020.02
9、Air Distributor0.851.483.51.48
10、“O"Ring0.020.010.020.01
11、Internal Cylinder2.24.124.24.12
12、Piston8.516.92416.9
13、External Cylinder14.519.53221.5
14、Guided Sleeve1.20.95.51.9
15、“O"Ring–––0.02
16、Stop “O"Ring–––0.01
17、Stop Ring–––0.32
18、Sharout–––1.86
19、Drive Chuck3.25.656.54.17
20、Bit Retaining Pin0.010.150.3–
21、Drill Bit10.515.83111.05
Technical Data
Length(Without Bit)NRC45NRC55NRC65NRC52
1020mm1111mm1250mm1208mm
Weight(Without Bit)94.00 kg66.50 kg110.00kg70.00kg
External DiameterØ99mmØ126mmØ146mmØ126mm
Bit ShankNRC45NRC55NRC65PR52
Hole RangeØ114-Ø127mmØ133-Ø15mmØ155-Ø190mmØ133-Ø146mm
Connection ThreadCustom supportCustom supportCustom supportCustom support
Working Pressure1.0-3.0Mpa1.5-3.5Mpa1.5-3.5Mpa1.5-3.5Mpa
Impact Rate at 17 Bar30HZ35HZ28HZ35HZ
Recommended Rotation Speed25-40 r/min25-40 r/min25-40 r/min25-40 r/min
Air Consumption1.0Mpa:8m³/min1.7Mpa:16m³/min1.7Mpa:20m³/min1.7Mpa:16m³/min
1.8Mpa:12m³/min2.4Mpa:22m³/min2.0Mpa:26m³/min2.4Mpa:22m³/min
2.4Mpa:16m³/min3.0Mpa:28m³/min3.0Mpa:35m³/min3.0Mpa:28m³/min
Similar Product Recommend