Welcome Customer !

Membership

Dongguan Xin Bao Instrument Co., Ltd.
Free Member ·1YRS
DongGuan,GuangDong
Manufacturer

Main Products: Environmental Test Chamber

Xwboo>Products
Product Categories

Dongguan Xin Bao Instrument Co., Ltd.Free·1YRS

  • E-mail

    info@otschina.com.cn

  • Phone

    860769-33365786

  • Address

    Jingshan 3rd industrial area,Chashantown,Dongguan City,Guangdong Province

Contact Now

Battery Crush Tester

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Battery Crush Tester
Product Details
Battery Crush Tester

Introduction:

Test battery safety performance through crush, after test the sample shall not explode or catch fire.This equipment becomes necessary inspection equipment for the battery manufacturer and researcher.

Applications:

  • Battery

Specification:

ModelXB-OTS-658
Pressure range13kN(1kN~20kN adjustable)
The pressure accuracy±1.0kg
Sensor resolution1/100,000
Compression space300*400*300mm
Machine travel200mm
Weight150kg
Delay function0 to 60 minutes
Diameter of fluid cylinder70MM
Power transmission mode1. The battery is clamped two flat, plate extrusion pressure in the hydraulic pressure transmission;
2. After the battery is firmly clamped, the pressure began to squeeze until the number was raised to the hydraulic cylinder 2500 (17.2Mpa), the pressure between the two plates is 3000pound (13KN), the sudden release of pressure;
3. Battery diameter parallel to the plate, the square-shaped battery needs to be rotated 90 degrees and then squeeze.

Features:

1.The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.
2.Lighting system is designed to observe the internal testing process;
3. Nail Penetration/Crush Force controllable within range from 250N to 13KN ,meet different standards;
4.Wire hole provides a possibility to test internal temperature or air pressure while vent hole with air blower can discharge the exhaust air.
5.Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter, which can reduce the noise and improve safety.