Welcome Customer !

Membership

DONGGUAN V FINDER ELECTRONIC TECHNOLOGY CO., LTD.
Free Member ·1YRS
DongGuan,GuangDong
Manufacturer

Main Products: Metal Detector

Xwboo>Products

Automatic reject Conveyorized Metal Detector System

Model
Nature of the Manufacturer
Manufacturer
Product Category
Conveyor Metal Detector
Place of Origin
City, Province
Overview
Automatic reject Conveyorized Metal Detector System
Product Details

Automatic reject Conveyorized Metal Detector System

With increased focus on quality and the avoidance of contamination, the metaldetectorhas become a critical inspection tool.


With increased focus on quality and the avoidance of contamination, the metaldetectorhas become a critical inspection tool. A metaldetectoris a sophisticated piece of equipment used to detect metalcontamination in product. When properly installed and operated, it will help improve product quality.


Proper training and education on metaldetectorsis a key to proper installation. A topic that creates countless hours of training and numerous service calls is product rejection.False rejects,false positives, constant rejectingand kickouts are all terms used in describing metaldetectorsreacting to a change.


There are two types of reactions: the first causes product to be ejected from the production line. The most common reason for this type of reaction is because there is metalcontamination found in the product. Companies that are new to metaldetection are often amazed when a detectorfinds metalin their product. In fact, some don't even believe it is possible that they have a contamination issue. The second type of reaction occurs when the detectorreacts without anything going through it. Often referred to as a false reject,this can create a loss of confidence in the metaldetector.


Prior to purchasing a metaldetection system, proper research and product testing is the first way to reduce false rejects. When creating a metaldetection system for a company, typically the vendor requests that product is sent to be to be tested. Product factors like product temperature, line speed, core temperature for frozen food and product alignment on the conveyor, must be considered in a proper test. This test provides a solution for the customer; creating detection sensitivities, metalspecifications and a specific metaldetection system.


The vendor should offer a test lab specifically for this purpose operated by a product test specialists using multiple detectorsof various sizes and frequencies.


It is always advisable for customers that request product testing, to review the results from all vendors and look for consistency in the sensitivities. Detectorscan be set to meet a particular specification, however if they run for long periods of time in a production environment they might cause false rejectsor erratic operation. A reputable vendor will always provide the customer with a detailed "Sensitivity Statement" that guarantees the sensitivity of the detector. In some cases, the statement will clearly state that their specifications are beyond the limits of the metaldetector.


Long periods without false rejectsare the key distinguishing factor of a top quality metaldetector. Improper installations can cause false rejects. In some cases, a quality metaldetectorcan be mounted on a conveyor that is not designed for metaldetection. This will create false rejectsas a common problem. An incorrectly designed conveyor structure, rejectdevice or even an improperly installed unit can cause interference signals from ground loops. A modification, like the addition of a belt scraper, if it is not properly isolated, can cause false rejects. These problems typically result in service visits and eventually the problem is resolved, but not after service costs and lost production time. Education and training will eliminate these service costs and lost production time.


False rejectscan also be caused by influences beyond the metaldetection system. Hand held radios and cell phones are typical sources of interference. Other interference sources are variable frequency drives, however they will make the detectoract erratic vs. a random false reject.Quality equipment will address these interference issues with specialized frequency filters. A common source of false detection is static discharge, found in gravity feed systems, pipe lines and conveyors. Static discharge is not typically random but more of a timed trigger. By integrating a conductive plastic to dissipate the static, manufacturers of metaldetection equipment can eliminate this problem.


The last area that can cause false rejectsis conveyor belt contamination. The conveyor belt can be contaminated from weld slag, small pieces of wire, or even used grease. Precautions should be taken when working around metaldetection systems to prevent belt contamination.


It is important to remember that simply having a metaldetectoron a production line, while providing a measure of protection, will never replace an all-inclusive contamination detection plan. Proper procedures and training must be integrated into the everyday production cycle to insure a contaminant free workplace.


Similar Product Recommend