Vertical Fall Metal Detection
DESCRIPTION
For inspection of powdery, granular or dry products that can be fed into a processing plant using gravity, the viking vertical metal detector is an ideal choice.
viking's vertical metal detectors can be ordered in either lacquered aluminium (or stainless steel) with a wide range of opening sizes. With the help of a support frame, the detector can be assembled in a variety of ways.
A stream can be treated with an automatic reject system to eliminate contaminated products. The pressure is controlled by the air pressure. It is recommended that the product be passed through the metal detector by using an UHMW-antistatic pipe. A drawer is available to store the test ball. This simplifies manual testing.
For specific packaging designs, viking offers a compact metal detector that can be placed in confined spaces. This detector is placed between a Multihead weigher and vertical packaging machines.
vertical METAL DETECTOR APPLICATIONS
Flour, rice and breakfast grains, flours, powders, cereals, sugar, chemicals, nuts, and many other products.
Details of specification
IMPORTANT FEATURES
Automatic balancing
Automated calibration
A large memory menu to save product specifications.
Data saving via serial interface (excluding Contact software).
Modular exchangeable electronics
Test procedure for automatic testing
Water and dust resistance (IP69K). No sealant edges. They are welded all around.
SPECIFICATIONS
| CONSTRUCTION | Lacquered epoxy aluminium, or stainless steel304 |
| OPENINGTYPE | Round or rectangular > the standard and amended |
| DISPLAY TTYPE | Standard Stealth / Optional Inceptor |
| OPENING DIMENSIONS | 75 mm opening dimensions / 150mm / 200mm (special sizes possible) |
| PROTECTION | IP65 Aluminium/IP69K/Nema4X (stainless Steel Design) |
| POWER | 230V |
| AIR | 80 psi (4-5 bar) |
| COMMUNICATION | RS485 / Optional: Ethernet/wireless |
| ALARM | Sound signal / warning lamp |
| OPTIONS | Separate display / Portable Display / Ejection System / Catch tray ball test balls / Floor stand/Contact Software |
| DISCHARGE THE VALVE REJECTION PLAN | Cowbel or gate valve |
The majority of people who think about metal detectors immediately think of security lines or luggage scanners. It's rare that we think of metallic detectors for the Food Industry. However, they're gaining tremendous ground and increasing in popularity for manufacturers and distributors of food products and packaging. FDA initiated the surge in demand because safety is becoming an even more important regulation. Along with consumer safety, companies want their reputation for safe products to be protected from lawsuits.
What FDA Metal Detection Standards is it?
FDA is really focusing on food product contaminants. Due to the numerous cases that have been discovered, resulting in costly recalls/lawsuits, has established metal detection standards so that all companies can follow the same principles. The FDA's Health Hazard Evaluation Board has stated that metal fragments between 0.3 and 1 inch (or 7mm to 25mm in length) are unacceptable when found in any products. A foreign object with a diameter less than 0.3 inches (7mm), could cause serious injury for people who fall within special risk categories, such as children, the elderly, and those recovering from surgery. Foreign objects found inside food products can be considered unsafe.
Foreign objects, including metals such as blades made for cutting metal, wires made from mesh belts used in product conveying, washers nuts and bolts from mixing and cooling machines, injection needles, and dispensing machine, can all enter food products. For metal inclusion to be dealt with, the FDA requires these steps to be considered:
Be aware of the potential hazards. You need to consider all possibilities that may arise in your production plant, including the metal parts we've already discussed. Recognize the possible dangers at each point and ensure that they are prevented.
Determine the Potential Hazard Level. The hazards that were listed will affect or come into direct contact at this stage in development. Is it FDA-acceptable or should it not be?
Identify and Control Critical Points. You need to establish critical control points in order to inspect the product at specific stages. It helps to find the source of the problem quickly and allows for quicker resolution.
Make a Control Strategy. This will help you to keep control. Start with one of the following scenarios: Metal has been detected or it has not been detected. You will need to create a plan which ensures the removal of the metal, checks that the machine has not missed and a strategy that can be used for contro.