-
E-mail
manger@vikingdetector.com
- Phone
-
Address
Room 301, No.23, Machong Avenue, Machong Town, Dongguan City, Guangdong Province
Membership
Help
DONGGUAN VIKING TECHNOLOGY CO;LTDFree·1YRS
manger@vikingdetector.com
Room 301, No.23, Machong Avenue, Machong Town, Dongguan City, Guangdong Province
Product Features:
1. The instrument has two detection modes: heating mode and direct suction mode
2. The instrument has high detection sensitivity and short response time
3. The instrument can detect a variety of explosives containing nitroaromatic hydrocarbons
4. The sensor film has good recoverability and high reuse rate
5. The instrument has automatic cleaning and manual cleaning functions, and the cleaning time is short
6. The false alarm rate of instrument detection is low, and the data is stable and reliable
7. There is no radioactive source inside the instrument, and there is no radiation hazard to the operator and the measured target.
8. The instrument has a wide range of applications and strong environmental adaptability
9. The instrument software interface is friendly, the degree of intelligence is high, and the operation is simple and fast
10. The instrument is beautiful in appearance, small in size, light in weight, easy to carry around
11. The instrument is industrial-grade safety protection level
Technical Parameters:
1. The quality of the instrument: the mass of the whole machine is less than 1.2kg (including the battery and the heating head).
2. Safety in use: The device does not contain any radioactive sources.
3. Battery life time: The handheld instrument has its own battery. In the suction sampling mode, the continuous working time of a single battery is ≥20 hours; in the wipe sampling mode, the continuous working time of a single battery is ≥10 hours.
4. Display: 3.5-inch LCD color liquid crystal display, resolution 640*480dpi.
5. Software function: The instrument has self-checking function, calibration function and automatic cleaning function.
6. Data storage function: The instrument has the functions of real-time data storage, retrieval and export. The storage capacity is more than 1 million. The instrument has an expandable data storage method.
7. Data interface: The instrument has a USB data interface and a charging interface.
8. Alarm prompt: The instrument can provide alarm prompts such as sound, light, and characters.
9. Start-up time: the cold start-up time of the instrument in heating mode is ≤ 2s.
10. Detection types: The instrument can detect B explosives (RDX+), LLM-105, HNS (hexanitrostilbene), double-base propellant, NTO, DNAN, HMX, PYX, HAT, HATO, TATP, H2O2, etc. an explosive.
11.1. The number of times of use of the sensor device: Sampling and analysis of 100ng of samples, the number of times of normal detection and alarm of the single-chip sensor device of the equipment is greater than or equal to 500 times.
12. Detection limit: Sampling and analysis of samples, the detection limit of the instrument is 0.1ng.
13. Alarm response time: The alarm response time of the instrument is less than or equal to 1s.
14. Alarm recovery time: Sampling and analysis of 10ng samples, the alarm recovery time of the instrument is ≤8s.
15. Working mode switching: When the instrument is powered on, it supports the hot swap of the heating head, and the working modes of the inspiratory sampling and wiping sampling of the instrument can be automatically switched with the hot swap of the heating head, and the instrument keeps working normally without crashing, Caton, etc.
16. Noise management function: In the power-on state (not the detection and cleaning process), the internal suction pump of the equipment does not turn on, and there is no suction pump noise.
17. Anti-interference test: the equipment is used to detect common toilet water, balsamic oil, disinfectant, gasoline, ether, ethanol, alkane, nail polish, liquid foundation, body lotion, hand cream, coffee, perfume, chili powder. , pepper, monosodium glutamate, sugar, salt, white vinegar, and beverage materials are not false.
18. Overall machine size: including heating head≤326mm×89mm×65mm, without heating head≤296mm×88mm×65mm
Detection basis:
1. Detection basis 1. GA/T 1323-2016 "General technical requirements for trace explosive detectors based on fluorescence quantitative polymer sensing technology".
2. GB16796-2009 Safety requirements and tests for safety precaution and alarm equipment.
Test Report
1. The test report issued by the National Security Alarm System Product Quality Supervision and Inspection Center
2. Test report issued by China Ordnance Equipment Special Product Quality Supervision and Testing Center
3. Report issued by the National Quality Supervision and Inspection Center for Energetic Materials Products
Patent Certificate
1. The explosive detector has an electropolymerizable chemically modified electrode organic material and its application in ultra-trace detection.
2. The explosive detector has the invention patent certificate of organic fluorescent small molecule film material and its application in DNT and vapor detection.
3. The explosive detector has a patent certificate for a fluorescent signal detection device of a fluorescent explosive detector.
4. The explosive detector has a patent certificate for the structure of the sensing film cavity of the fluorescent explosive detector.
Application scenarios
STAR-ES I PRO is widely used in large-scale conference security, large-scale exhibition security, Olympic venue security, airport security, high-speed rail security, subway security, public security checkpoints, border checkpoints, military checkpoints and other sites.