Welcome Customer !

Membership

QINGDAO KNNJOO MACHINE INC.
Free Member ·1YRS
QingDao,ShanDong
Manufacturer

Main Products: Shot Blasting Machine

Xwboo>Products

Steel Structural Wire Rod Shot Blasting Machine Diameter 40mm

Model
Nature of the Manufacturer
Manufacturer
Product Category
Wire Rod Shot Blasting Machine
Place of Origin
City, Province
Overview
Steel Structural Wire Rod Shot Blasting Machine Diameter 40mm
Product Details

Wire Rod Steel Structural Shot Blasting Machine On Widely Used

 

Wire Rod Steel Structural Shot Blasting Machine

 

This machine is the best special equipment for cleaning coiled wire rods. It uses shot blasting to remove the wire rod surface oxide scale and the surface scale layer formed by steel rolling. After the round billet is shot blasted, its entire surface derusting grade reaches Sa2.5, and the surface roughness grade reaches Ra6.3~12.5μm. The output can reach 15 tons per hour.

 

Steel Structural Wire Rod Shot Blasting Machine Diameter 40mm 0Steel Structural Wire Rod Shot Blasting Machine Diameter 40mm 1

 

Technical data

 

Diameter of the wire

Φ 4~Φ 40mm

Inner diameter of the wire rod

Φ 800-1100mm

Outer diameter of the wire rod

Φ1200-1400mm

Height of wire rod

2500mm

Maximum load:2700kg2700kg

 

Shot blasting system

 

The shot blasting system of the shot blasting machine is one of the most important systems. It uses the blade frame driven by the motor to rotate at a high speed to make the pellets entering from the feed pipe form a shot blasting stream, which is projected on the surface of the strip to remove the strip Iron oxide scale on steel surface. There are a total of four shot blasting wheels, two for the upper surface and two for the lower surface, and they are not on the same straight line to form a good type of shot blasting and improve the shot blasting effect

 

Abrasive separation system

 

The pellets of the shot blasting machine are a recycling system. The newly added pellets enter the lower spiral from the feeding funnel, and the lower spiral conveys the new material to the upper spiral via the bucket elevator, enters the pellet separator and is separated and redistributed to four The shot blasting wheel, the pellets passing through the shot return to the lower spiral, forming a circulatory system..

 

Surface quality requirements after treatment:


A. No iron oxide scale remains on the surface of the steel after shot blasting
B. Surface cleanliness: Sa2.5 level
C. Surface roughness: Ra6.3~12.5

 

Our company

 

Our company is an automated production enterprise for shot blasting machines, environmental protection equipment, and robots. The company has a modern scientific research center, advanced manufacturing workshops and industry-leading talents. The products include more than 100 kinds of shot blasting machines, shot blasting strengthening machines, sand blasting equipment, casting machines, dust removal environmental protection equipment and related supporting steel shot steel grit, wear-resistant accessories, etc. The company has obtained international IOS9001 certification, German TUV certification, EU CE certification, French BV certification, and has obtained the right to import and export enterprises, exporting to Germany, Spain, France, the United States, South Korea, Japan, Singapore, Australia, Russia and other 49 countries , Enjoy a high reputation and reputation in other countries and domestic.

 

 

Similar Product Recommend