The machine adopts the mode of workpiece fixed, honing head rotating and reciprocating. It has a wide application, especially for processing of non-rotary workpiece, such as hydraulic cylinder, air cylinder, square body, the workpiece with rotary shaft and flange plate, etc.
The workpiece is fixed by V-type supporting and chain locking. The machine can be programmed to realize automatic operation, with setting up to honing time, reciprocation frequency and honing distance. It is suitable for mass production or single maintenance production. The machine selects Taiwan Delta control system with human-machine interface touch screen.
The surface roughness is up to Ra 0.2µm and roundness is less than 0.03mm, the hole tolerance is up to IT7 or above.
Adopting the special oil for cooling, the work area is almost not deformed and it is up to the higher precision on size and geometry with an excellent surface finish. Honing is the important processing method of precise inner hole and long hole, which has a high efficiency.
There is the crossing texture on the surface of oilstone, it is good for protection of lubricant film, and avoiding effectively occurring of embedded sand. So the using life is prolonged.