The water in ordinary rivers and lakes is generally not drinkable directly, and there are many microorganisms and bacteria. Second, some of the polluted well water on the surface cannot be used as drinking water. Uncontaminated mountain spring water is of course the best drinking water, but this kind of mountain spring water is not available everywhere, and resources are still very scarce. The polluted spring water in some mountains is also not drinkable.
The remaining two, tap water and purified water, are the most used water sources by our species. Purified water filters and softens tap water, and drinking it reduces limescale.
Water purification equipment requires vontron membrane. A set of ordinary household filter elements generally needs to be replaced in 3 to 6 months, because after long-term use, the filter residue inside has accumulated a lot. If it is not replaced regularly, it will pollute the water quality,harmful to health.
Specifications
BW-8040
BW-4040
LP-8040
LP-4040
Material
Aromatic polyamide
Structure
Spiral-wound
Effective Membrane Area(m²)
37
7.6
37
7.6
Thickness of the inlet grid(mil)
34
Standard Test Solution
2000mg/L NaCl
1500mg/L NaCl
Operating Pressure
1.55Mpa
1.55Mpa
1.05Mpa
1.05Mpa
Test Temperature
25℃
Recovery(%)
15%
pH
6.5~7
Permeate Flow Rate(m3/d)/GPD
38/10000
7.6/2000
40/10500
8/2100
Rejection(%)
99.5
99.0
Max. Operating pressure
4.1Mpa (600Psi)
Max. feed flow (GPM)
75
16
75
16
Feed Temperature
5~45℃
Feed pH
3~11
Cleaning pH
2~12
Max. feed turbidity
1.0
Max. feed SDI15
5
Residual Chlorine
< 0.1 mg/L
Max. Pressure Drop each Element
15 psi
SPECIFICATION
human hair
pollens
lead dust
Fine silt
pharmaceuticals
fine silt
75 microns
10
0.1-0.7
0.01-1
0.001-0.01
0.0005-0.001
WORKING PRINCIPLE
Application Case
PRODUCT APPLICATION
Pure water
Water reuse
cooling water
Boiler water
FAQ
Q1: How do you clean an industrial RO membrane?
A:During a chemical cleaning process, membranes are soaked with a solution of chlorine bleach, hydrochloric acid or hydrogen peroxide. First the solution soaks into the membranes for a number of minutes and after that a forward flush or backward flush is applied, causing the contaminants to be rinsed out.
Q2:How long do industrial RO membranes last?
A: three to seven years
Reverse osmosis (RO) systems have become the industry standard for purification of any feed water source- as well as wastewater and reuse applications, including a number of industrial processes. The typical lifetime of an RO membrane element is three to seven years depending on the application.
Q3: What type of membrane is used in RO?
A:The RO unit uses thin-film composite (TFC) polyamide membranes in spiral-wound configuration.