Each standardized UV disinfection module consists of a special uv lamp for water treatment, UV lamp tube, quartz sleeve, power distribution system and data acquisition system. Technical advantages of industrial UV water treatment module:
◆The low water resistance module structure has lower water resistance than the traditional module structure, and the water level change before and after disinfection is small.
◆The waterproof grade complies with the IP68 grade standard and is suitable for occasions with strict requirements.
◆The cable part is equipped with a sealing ring to effectively prevent the short-circuit damage of the lamp tube caused by water in the cable. Made of high-quality corrosion-resistant stainless steel materials.
Agua SA series constructed with highly polished 316L stainless steel chamber and stainless steel control cabinet.
Furthermore, the UV disinfection does not alter the physicochemical composition of the water. Which means that water going through the UV reactor goes out with the same physical and chemical composition than it has before going in. The process only disinfects by removing viruses, bacteria, microbes, etc.
While all other water disinfection technologies like chlorine, bleach, ozone, chlorine dioxide and other will alter the water. They may even create harmful by-products and residuals that threaten the health.
ADVANTAGES OF THIS ULTRAVIOLET WATER STERILIZER SYSTEM:
An industrial UV water treatment uses ultraviolet germicidal irradiation (UVGI) as a sterilization method to break down microorganisms including pathogens, viruses and molds. The ultraviolet rays work to destroy microorganisms' DNA, thus disrupting their ability to reproduce and effectively killing them. Of the three types of UV — UV-A, UV-B and UV-C — UV-C light is the one used in UV sterilizers. UV-C contains germicidal UV within its spectrum, measured at a wavelength of 254 nanometers (nm). UV-C is shortwave ultraviolet radiation, compared to longwave UV-A and UV-B, and is the type of UV capable of causing the breakdown of the molecular bonds in microorganisms' DNA.
SPECIFICATION
Model
Flow rate
(GPM)
Chamber size
In/outlet
UV lamp
UV lamp quantity
Quartz tube
Ballast
SA-8120
95
1470x 274mm
DN200
GPO1148T5L/4P
8 pieces
QT6-1183
ZUM3-800-120
WORKING PRINCIPLE
TYPICAL INSTALLATION RECOMMEND
PRODUCT APPLICATION
Secondary water supply disinfection
Circulation cooling
Spring or swimming
Industrial water disinfection
APPLICATION
Industrial UV water treatment have a variety of applications in various industries. Some of their uses include air sterilization, water sterilization, and the sterilization of aquariums and ponds.