Wheat straw or rice straw pulping equipment.99% chemical straw pulp or mixed with recycled waste paper pulp.


Rice Straw is one of the most important materials that has been used for pulp and
paper production due to its abundance and cost-effectiveness. However, the pulping and
papermaking characteristics of the mixture of rice straw and used paper have rarely been
investigated. In this experiment, delignified rice straw was mixed with used paper in order to
make recycle papers with acceptable properties. Soda pulping process was carried out to
remove out of lignin. The delignification was designed to measure the effects in terms of
sodium hydroxide concentration and temperature, on the cellulose and lignin content of rice
straw, and its tensile strength and water absorption. The mass ratio of used paper and rice straw
was varied and its physical properties was observed and compared to paper from natural rice
straw. The delignification was conducted using NaOH concentrations (4-10% w/w) and
temperatures (60-90 degree) for 1 hour. The ratio of rice straw to used paper was varied (1:1-1:9).
An optimum condition was obtained from rice straw delignification at NaOH concentration of
8% and temperature of 90°C. The results of the optimum condition obtained the highest
amount of cellulose content and tensile strength while having the lowest amount of lignin