Quick temperature variation chamber (ESS)
Quick temperature variation chamber (ESS)
This chamber is used to test industrial products for the early detection of structural and manufacturing defects. Models with a rate of temperature change of 5℃/ min, 10℃/ min, 15℃/ min are produced.
Technical specifications:
Model | KWGD7025HD | KWGD705HD | KWGD710HD |
Internal volume | 252 L | 504 L | 1000 L |
Internal dimensions (D*W*H) | 600*600*700 mm | 700*800*900 mm | 1000*1000*1000 mm |
External dimensions (D*W*H) | 1750*900*1800 mm (approximately) | 2150*1050*1950 mm (approximately) | 2600*1300*2100 mm (approximately) |
Performance |
Temperature range | -70…+150℃ |
Temperature fluctuation | ≤±0.5℃ |
Temperature uniformity | ≤2℃ |
Temperature deviation | ≤±2℃ |
Range of temperature variation | -40...+80℃ or -55...+80℃ |
Temperature variation time | 5℃/min~15℃/min |
Materials |
Shell material | Cold rolled sheet steel, spray plastics on surface |
Internal material | Stainless steel |
Thermal insulation material | Polyurethane foam + glass wool |
Refrigeration system |
Refrigeration mode | Mechanical compression, two-stage refrigeration |
Compressor | Imported semi-closed compressor |
Cooling mode | Water cooling |
Heater | Nickel-chromium alloy heating wire |
Blower | Centrifugal blower |
Temperature sensor | Pt100 |
Controller | Touch screen, program and parameter control |
Power supply | AC380V, 50Hz, Three-phase four-wire + earth wire |