Welcome Customer !

Membership

Hyde Science and Technology Limited
Free Member ·1YRS
XiAn,ShanXi
Manufacturer

Main Products: Salt Spray Test Chamber, Salt Spray Test Machine, Salt Spray Corrosion Test Chamber|High & Low Temperature Test Chamber|Other Test Chambers

Xwboo>Products

Hyde Science and Technology LimitedFree·1YRS

  • E-mail

    friday@hydescience.com

  • Phone

    86-29-89182431

  • Address

    710065, Room 1906, Block E, Van Metropolis, Road Tangyan, Xi'an, China

Contact Now

Thermal shocking testing chamber (3 areas)

Model
Nature of the Manufacturer
Manufacturer
Product Category
Testing chamber
Place of Origin
City, Province
Overview
Thermal shocking testing chamber (3 areas)
Product Details

Thermal shocking testing chamber (3 areas)

This chamber is designed for cyclic climatic tests, to test temperature resistance of samples in a rapid temperature change.

The design of this chamber includes:

◆ High temperature zone;

◆ Testing (working) area;

◆ Low temperature zone.


 The working area of this chamber is fixed, and equipped with dampers for supplying hot and cold air. Samples for testing are in the basket and placed in the working area. Use damper to supply hot and cold air to change the temperature of the working area and implement the program of high temperature and low temperature maintenance. Additionally, there is a damper for supplying ambient air to the working area for carrying out relevant tests.

 

Technical specifications:

Model

HD-CTS3-1J

HD-CTS3-2J

HD-CTS3-5J

HD-CTS3-10J

Internal volume (L)

120 L

210 L

504 L

900 L

Internal dimensions (D*W*H)

400*500*600 mm

500*600*700 mm

700*800*900 mm

900*1000*1000 mm

External dimensions (D*W*H)

1620*1460*2360 mm

1720*1560*2460 mm

2120*1820*2260 mm

2420*2020*2660 mm

Preheating area

Preheating temperature upper limit

200℃

Heating time

R.T.~+200℃: 40min (approximately)

Pre-cooling area

Pre-cooling temperature lower limit

-75℃

Cooling time

R.T.~-70℃: 90min (approximately)

Working area

Temperature shocking range

High temperature: 60℃~+150℃;

Low temperature: -55℃~-10℃; 

Temperature fluctuation

≤±0.5℃

Temperature deviation

≤±2℃

Temperature recovery time

≤5min

Material

Shell

Cold rolled sheet steel, spray plastics on surface

Internal material

Stainless steel

Thermal insulation material

Polyurethane foam + glass wool

Refrigeration system

Refrigeration mode

Mechanical compression, two-stage refrigeration

Cooling mode

Water cooling

Compressor

Imported compressor

Controller

Programmable logic controller, 7’’ LCD touch screen

Power supply

АС380V, 50Hz, Three-phase four-wire + earth wire



Similar Product Recommend