Welcome Customer !

Membership

GUANGDONG BELL EXPERIMENT EQUIPMENT CO., LTD.
Free Member ·1YRS
,GuangDong
Manufacturer

Main Products: Battery Tester|Walk-in Test Chamber, Walk-in Laboratory Aging Chamber|High & Low Temperature Test Chamber

Xwboo>Products

GUANGDONG BELL EXPERIMENT EQUIPMENT CO., LTD.Free·1YRS

  • E-mail

    sales@belltestchamber.com

  • Phone

    8676923280911

  • Address

    1 Wusong 1st Street, Dongcheng District, Dongguan 523117, Guangdong, China

Contact Now

Thermal Abuse Test Chamber – Test Battery Module

Model
Nature of the Manufacturer
Manufacturer
Product Category
Testing Standard
Place of Origin
City, Province
Overview
Thermal abuse test chamber protect for short circuit caused by incorrect operation of the operator and battery electrode, battery positive and negative connection, etc
Product Details

Thermal Abuse Test Chamber Standards

  • IEC 62133
  • IEC 62619
  • UL 1642

Relevant standards requirement

Single storage cell Safety Test

Heating test steps:

  • Charge the battery according to the standard 6.1.3
  • Place it into the chamber

–For lithium storage battery, the oven temperature is raised at a rate of 5℃/min to the temperature of 130℃±2℃, remain this temperature for 30min, then stop heating.

–For metal cyanide nickel battery, the oven temperature is raised at a rate of 5℃/min to a temperature of 85℃±2℃, remain this temperature for 2h, then stop heating.

  • Observe for 1h

Storage Battery Module Safety Test

  • Charge the battery module according to the standard 6.1.4
  • Place it into the chamber

-For lithium storage battery, the oven temperature is raised at a rate of 5℃/min to a temperature of 130℃±2℃, remain this temperature for 30min, then stop heating.

–For metal cyanide nickel battery, the oven temperature is raised at a rate of 5℃/min to a temperature of 85℃±2℃, remain this temperature for 2h, then stop heating.

  • Observe for 1h

Thermal Abuse Test Chamber Technical Parameters

ModelBE-101-1000A
Temp. RangeAmbient – 200℃ (Controllable)
Control Accuracy±0.5℃
Temp. Uniformity±2.0℃( No load)
Temp. Rising SpeedRT – 150℃ (≧5℃/min, liner with load 40kg module)
Temp. overshoot≦2.0℃
Control Display MethodPLC Touch screen + remote control, networking,
Cell phone APP alarm device, with USB interface, R485 interface can be connected to computer control.
Testing Room DimensionW1000 X D1000 X H1000 mm
External Chamber DimensionW1400 X D1300 X H1840 mm
Inner chamber MaterialSUS304 Stainless Steel (Mirror finished)
External chamber MaterialSECC Steel Plate, Powder Painted
BasementWith universal wheel
Observation Window390 X 360mm (20mm Tempered Explosion Proof Glass)
Power Source380V 50HZ
Heating PowerAbout 12 KW
Safety Protection Deviceover-voltage, over-temperature, over-current protection.
protection for short circuits caused by incorrect operation of the operator and battery electrode, battery positive and negative connection, etc.
Safety DeviceSmoke exhaust system, explosion-proof pressure relief port, tri-color light alarm.