Welcome Customer !

Membership

Baoji XingYuTeng Measure and Control Instruments Co.,Ltd.
Free Member ·1YRS
BaoJi,ShanXi
Manufacturer

Main Products: Flowmeter|Pressure Gauge|Pressure Sensor

Xwboo>Products
Product Categories

Baoji XingYuTeng Measure and Control Instruments Co.,Ltd.Free·1YRS

  • E-mail

    info@xytck.net

  • Phone

    869173307712

  • Address

    5 / F, block C, building 10, high-end equipment Industrial Park, high tech Zone, Baoji City

Contact Now

QYB500 wireless pressure transmitter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
QYB500 wireless pressure transmitter
Product Details

Features

◆ Wireless testing of pipeline pressure, typically used in oilfield wellhead pressure monitoring; 

◆ Explosion-proof design: flameproof aluminum shell, circuit board system is intrinsically safe; 

◆ Protection grade IP67 , fully sealed and waterproof design; 

◆ ZigBee communication, it can be configured and tested with a hand copy device; 

◆ LCD display: -40~70 ℃ wide temperature working range, can display pressure data, battery voltage, wireless channel and other information; 

◆ Adjustable installation direction: It can be connected to the on-site pipeline valve through a live connection or an adapter, and the direction can be adjusted; 

◆ 38Ah high-energy lithium sub-battery, long working life; 

◆ High-gain antenna, wireless transmission distance of more than 200m ; 

Measured medium

Liquid, gas

Reporting cycle

1 minute to 12 hours can be set 

Pressure range

0~60MPa  can be customized

Decimal places

0~3 digits can be set 

Precision

0.5 level

Signal transmission

ZigBee wireless

Overload pressure

150% FS

Transmit power

≤ 40mW

Shape and installation

◎Dimensions

◎Installation

1. Make sure that the measurement range required by the process is consistent with the range of the transmitter to be installed.

2. The thread specifications of the joints for process installation must be matched with the transmitter.

3. To install the pressure transmitter on the pipeline, first close the valve (needle valve or gate valve) on the pipeline where the pressure transmitter is to be installed, and then there are two installation methods:

(1) Screw the transmitter directly into the upper port of the valve;

(2) Screw the live connection or adapter into the upper port of the valve, and then screw the transmitter into the upper port of the live connection or adapter. This installation method can adjust the direction by adding a live connection or adapter. After installation, open the needle valve to confirm that there is no leakage, that is, the installation is qualified.