Welcome Customer !

Membership

Baoji XingYuTeng Measure and Control Instruments Co.,Ltd.
Free Member ·1YRS
BaoJi,ShanXi
Manufacturer

Main Products: Flowmeter|Pressure Gauge|Pressure Sensor

Xwboo>Products
Product Categories

Baoji XingYuTeng Measure and Control Instruments Co.,Ltd.Free·1YRS

  • E-mail

    info@xytck.net

  • Phone

    869173307712

  • Address

    5 / F, block C, building 10, high-end equipment Industrial Park, high tech Zone, Baoji City

Contact Now

BS-5 2088 Intelligent Pressure Transmitter Circuit Board

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
BS-5 2088 Intelligent Pressure Transmitter Circuit Board
Product Details

1. Overview:

Fully intelligent two-wire 4-20mA working mode, 4-digit 0.36 " digital tube display.

The  sensor is excited by constant current and constant voltage , constant current 0.4mA, constant voltage 2.5VDC.

ADC input amplitude is ±5mv~±80mv, providing 24-bit core resolution, and the useful number of bits is up to 18 bits. The built-in magnification of the circuit board is 12~200 times. Support automatic polarity conversion of sensor signal.

Suitable  for diffused silicon pressure sensor and ceramic pressure sensor.

Provide  zero reset migration function, batch parameter modification function, panel button modification function, suitable for the special needs of various customers.

Fully  digital calibration, without any movable potentiometer, lower temperature drift.

Strengthened  anti-interference design, suitable for all kinds of industrial environments with harsh electromagnetic environments.uUnique  nonlinear correction function, ideal to eliminate the nonlinear error of the sensor.

Support passive migration and range scaling . Suitable for signal processing of various sensor types.

2. Main parameter index:

ØPower  supply voltage: 10~36VDC, 24VDC is recommended. The power supply changes have basically no effect.

Ø  signal range: circuit board is a ±5mv~±80mv@0.41mA, the corresponding output up to 1.5mA 320mv diffused silicon sensor.

Ø  constant excitation: 0.41mA, suitable sensors (3 ~ 8kΩ) of the constant current power supply.

ØConstant  voltage excitation: 2.5VDC/0.5mA, suitable for ceramic piezoresistive sensors.

ØSampling  speed: 3~30 times/sec adjustable, with filter coefficient selection function.

ØDisplay  mode: 0.36 inch bright red LED digital tube.

ØWorking  environment: temperature -30~80℃, humidity <85%, dry and non-corrosive environment.

ØDimensions  : 54*54*26 .

Ø Load resistance: (VSS-10)/20mA.

Ø Current output resolution: about 1uA.

Ø Temperature drift coefficient: <35ppm/℃.

ØDisplay  range: -1999~9999.

3.Outline:

The transmission board is a two-layer circuit board superimposed installation, here is only the size drawing of the bottom board. The total height of the circuit board is 26mm . Suitable for installation in 2088 explosion-proof aluminum housing