BS-5YM Intelligent Pressure Transmitter Circuit Board
Overview
The BT-5Y intelligent thermometer head is a fully intelligent two-wire 4-20mA working mode with 5 -digit LCD display. Provide active and passive migration function, 5 kinds of unit conversion, 6 kinds of display modes, display resolution adjustment, restore factory data and other functions, suitable for the special needs of various customers. Built-in 24 -bit ADC with 18 effective bits . The built-in magnification of the circuit board is 12~200 times. The sensor is dual-channel constant current excitation, and the standard three-wire PT100 connection method eliminates the influence of lead resistance. High-precision fitting algorithm eliminates the non-linear error of the sensor. Fully digital calibration, without any movable potentiometer, lower temperature drift. The enhanced anti-interference design is suitable for all kinds of industrial environments with harsh electromagnetic environments.
Technical indicators and parameters
voltage | 12~30VDC recommended 24VDC | Current output Resolution | About 1uA |
Measuring range | -200℃~850℃ , the minimum transmission range of 50℃ can be configured by PC | working environment | Temperature -40℃~85℃ |
output signal | Two-wire system 4~20mA | Temperature drift coefficient | <30ppm/℃ or 0.004%FS/1℃ (basic range). |
Dimensions | 53*53*23 | measurement accuracy | 0.1%FS (calibration basic range) |
Load Resistance | (VCC-12)/20mA | Display range | -19999~99999 |
Shape and wiring
◎Dimensions
◎Wiring
J3 in the figure is a single-wire interface for calibration communication.
J3 is the sensor wiring terminal.
24V+ and GND are the transmitter power wiring ports, which provide DC24V power and output 4-20mA current signals.