- Suitable to measure dynamic air gauge pressure during side collision car crash tests.
Small size, easy to mount;- Measurement range 30kPa, over load 150%;
- Response time<0.1ms;
- Anti-shock>100g;
Pressure sensor DP30K, based on piezo resistance effect, includes a full bridge circuit. There is resistance changed by measurement air pressure different, then the voltage signal can be converted according to the resistance difference. The reasonable MEMS process makes sure the sensor good linearity performance and stability. The sensor includes wear-resisting cable with default length 6m. And the LEMO connector and Dallas ID are optional.
Technical Specification (5V, 25℃):
| Name | Unit | Value |
| Meas. Range | kPa | ±30 |
| Over Load | kPa | ±45 |
| Non-linearity | % | <0.5 |
| Response Freq. | Hz | 10000 |
| Offset | mV | <5 |
| Warm Up | ms | 50 |
| Excitation Voltage | VDC | 5 |
| Power Current | mA | <10 |
| Anti-Shock | g | >100 |
| Isolation | MΩ | >100 |
| Operation Temp. | ℃ | -20-70 |
| Storage Temp. | ℃ | -40-125 |
| Case Material | / | Alloy |
| Weight | grams | 5 |
| Dimension | mm | 21.5×13.2×10 |
Drawing Reference:

Wire Assignment:
| Red | Excitation+ |
| Black | Excitation- |
| White | Signal- |
| Green | Signal+ |
| Shield | Connector Case |
![]() | Pressure Sensor DP30K-EN |
,

