- Suitable to child seatbelt tension test during vehicle safety test;
Light weight design and easy to install;- Allowance to together with SBF-DP display meter, to help adjust child seatbelt tension before crash test.
- 500N Measurement Range (Others are optional);
- The cable is easy to exchange;
Seatbelt force sensor based on full bridge should take the principle of strain, transfer the internal tension of the belt to the sensor structure, the structure of the strain can change resistance different, and then convert into voltage change. The main structure of sensor is made of titanium alloy material to reduce its weight to other effects. As to different ranges or calibration ranges can be required.
| Name | Unit | Value |
| Range | N | 500 |
| Non-Lin. | % | <3% |
| Cubic fit error | % | <0.5% |
| Excitation | V | 2V-10V |
| ZMO | mV/V | <0.1 |
| Current | mA | <30 |
| Bridge Res. | Ω | 350 |
| Isolation Res. | MΩ | >100 |
| Temperature | ℃ | -20-+80 |
| Belt Thickness | mm | ≤2 |
| Belt Width | mm | ≤50 |
| Mounting | / | Bars Insert |
| Material | / | Titanium Alloy |
| Weight | grams | 78 |
| Dimension | mm | 65×35×16 |
Drawing:

It can be equiped with digital display SBF-DP, which is used to adjust the tension of the child Seatbelt before the test, and show the current force value at the same time, also measure the peak value.

Wires Assignment
| Red | EXC+ |
| Black | EXC- |
| White | SIG- |
| Green | SIG+ |
| Shield | Case |
![]() | Seatbelt Force SBF-500N -EN |
,

