Welcome Customer !

Membership

Zhengzhou TIEI Extraction Technology Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 萃取设备

Xwboo>Products

Phosphoric Acid Solvent Extraction

Model
Nature of the Manufacturer
Other
Product Category
Food fermentation industry
Place of Origin
City, Province
Overview
Solvent extraction is an efficient, economical and widely-used technology for the purification of wet process phosphoric acid (WPA).
Product Details
Phosphoric Acid Wet Process Brief
Solvent extraction is an efficient, economical and widely-used technology for the purification of wet process phosphoric acid (WPA).
High grade phosphoric acid was obtained using liquid-liquid extraction with aliphatic alcohols to separate metal and fluoride ion impurities in the aqueous phase. The influence of alcohol chain length, alcohol concentration, organic/aqueous phase ratio, temperature, shaking time and phosphoric acid concentration on P2O5 extraction was studied. Scrubbing with acid and stripping with water were also investigated. N-octanol proved to the most efficient and selective alcohol. The temperature had a slight positive effect and the extraction was enhanced by increasing P2O5 and with the increase of organic/aqueous phase ratio. The optimum organic/aqueous phase ratio for stripping was determined to be 2.0. For 9.2M H3PO4 98% of fluoride ion was removed whereas almost complete removal of ion, manganese, copper, cadmium and zinc was attained.

Phosphoric acid, H3PO4, is second only to sulphuric acid in volume produced. It is primarily used for the manufacture of phosphate salts which are used in turn for detergents and fertilisers. There are two methods of production that can be used in its manufacture. The thermal process is used to produce acid from elemental phosphorous. The acid produced is extremely pure however, it is also expensive. The other process used is the wet process. This process manufactures acid from phosphate ores. The majority of phosphoric acid is manufactured using this process.Wet process phosphoric acid flowchart as flows:

:
With the advanced wet process phosphoric acid technology, Tiei Extraction company developed new type of centrifugal extractor to support.

Centrifugal extractor is a new type of liquid-liquid extraction and separation equipment, with fast and efficient advantages, it has essential difference in principle with traditional extraction equipments such as mixer settler, extraction column and so on. Centrifugal extractor adopt motor to drive the bowl with high-speed rotation, under the condition of shear force generated by bowl or blade rotation, two different density and immiscible liquids complete mixing and mass transfer; and separated rapidly by centrifugal force generated by high-speed rotation of bowl.

Centrifugal Extractor Work Process:
 1.Mixing and mass transfer process:

Light and heavy liquor enter in the annulus mixed zone proportionally and from two different feed pipe orifice respectively, which formed by bowl and shell, with the help of bowl’s rotation, the two phases through turbine disc
and impeller mixing and dispersing quickly, after mass transfer completely, to finish mass transfer process.

2.Two phases separation process

With the eddy-current disc help, mixture enter in bowl, at the compartment formed by board, the mixture is quickly synchronized with the bowl, under the action of centrifugal force, the larger density liquor moving away from the bowl center to the wall gradually in the upward flow; and the small density liquor doing the opposite, after clarification, two liquids enter into collection chamber with their own weir plate respectively, and drawn out by tigella, to finish the separation process.

Centrifugal Extractor Characteristics:
   1.Simple and stable structure

  Top-suspension structure, there is no bottom bearing and mechanical seal in the process area, no leakage risk, easy to maintain and save maintenance cost, long service life;

  2. Energy-saving

  Large capacity, more energy-saving (under the same capacity condition, the power consumption is 1/10~1/3 of traditional annular type;

  3. Corrosion resistance

  Equipment could adopt perfluoro polymer material, resistant to strong acid (hydrochloric acid, mixed acid etc.) and some organic solvent;

  4. Had perfect separation efficiency

  Various hybrid structures could be chosen, high stage efficiency, adapt to easily emulsified system.

  5. Easy to change parts

  No need to dismantle machine when changed heavy phase parts, simple and easy, reduce labor intensity;

  6. Low liquid residual

  Equipment with small valid volume, liquid has a short retention time.

  7.High automation

  It could realize timely monitoring on-line; optional on-line cleaning system for GMP standard, and adapt to both intermittent and continuous running completely;


Similar Product Recommend