Welcome Customer !

Membership

ODOT Automation
Free Member ·1YRS
,
Other

Main Products: 工业通讯设备

Xwboo>Products
Product Categories

ODOT AutomationFree·1YRS

  • E-mail

    sales@odotautomation.com

  • Phone

    +86-0816-2538289

  • Address

    Plant No. 204 MianYang Comprehensive Bonded Zone, Eastern section of FeiYun Avenue, MianYang, Sichuan Province, China.

Contact Now

CT-623F: 8 digital input&8 digital output /24VDC/ source or sink

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
CT-623F: 8 digital input&8 digital output /24VDC/ source or sink
Product Details

Product Details

1. Module Type

2. State indicators

3. Channel indicators

4. Wiring Terminal and Marking

5. Internal Bus

6. Field Power

7. Buckle

8. Grounding Sheet

9. Fixed Wiring Harness

8 digital input&8 digital output

Product Characteristic

CT-623F: 8-channel digital input /24VDC/ source or sink type & 8-channel digital output /24VDC/ source type

Module features

◆ The module supports 8-channel digital input, and supports source type and sink type two-way input. The input voltage is 0V/24VDC.

◆ The module supports 8-channel digital output, Output high level valid, and the output voltage is 24VDC.

◆ Module input channel can collect digital output signal of field equipment. (dry contact or active output)

◆ The module input channel can be connected to the 2-wire or 3-wire digital sensor.

◆ Module input channel supports 32-bit counter for each channel, the counting frequency < 200Hz.

◆ The input channel of the module supports the signal maintenance function, and the maintenance time can be set.

◆ The input channel of the module can set the digital signal input filtering time and the byte transfer order of the counter.

◆ The input channel of the module can set the counting mode and counting direction independently.

◆ Module output channel can drive field equipment .(relay, solenoid valve, etc.)

◆ The output channel of the module is equipped with short circuit, thermal shutdown and overvoltage protection functions.

◆ Module internal bus and field input and output , using Optocoupler isolation.

◆ Module has 16 digital input and output channel LED indicator light.

Technical Parameters

General Parameters

Power: Max.85mA@5.0Vdc

Isolation I/O to internal bus: opto-coupler isolation (3KVrms)

Field Power: Nominal voltage: 24Vdc

Input range: 22~28Vdc

Wiring: I/O wiring: Max.1.5mm²(AWG 16)

Installation: 35mm DIN-Rail

size: 115*14*75mm

Weight: 65g Environment Specification

Working temperature: -40~85℃

Environmental humidity: 5%-95% (No Condensation)

Protection grade: IP20

 

Environmental Parameters

Channel Number: 8-channel source/sink type input

Indicator: 8 channel input indicators

Open voltage: High input: Min.10Vdc to Max.28Vdc (Common: 0Vdc)

Low input: Min.0Vdc to Max.14Vdc (Common: 24Vdc)

Close voltage:

High input: Max.5Vdc (Common: 0Vdc)

Low input: Min.19Vdc (Common: 24Vdc)

Open current Max.5mA/ channel @28V

Input impedance >7.5kΩ

Input delay OFF to ON: Max.3ms

ON to OFF: Max.2ms

Prop filter Default: 10ms

Sampling frequency 500Hz

Count frequency <200Hz

 

Output parameter

Channel Number: 8 channel source type output

LED Indicator: 8 channel output indicators

Rated current: Typical value:0.5A

Leakage current: Maximum value: 10uA

Output impedance: <200mΩ

Output delay

OFF to ON: Max.100us

ON to OFF: Max.150us

Protection function:

Temperature protection: typical value 135℃

Protection current: typical value 1.1A

Short circuit protection support

Application

8 digital input&8 digital output-4
8 digital input&8 digital output-2
8 digital input&8 digital output-3