Serial Port Parameters
Note: M represents the valid parameters of master mode, S represents the valid parameters of slave mode, and F represents the valid parameters of free transparent transmission mode
M/S/F:Channel Number | 1Channel |
| M/S/F:Interface | RS485/RS232/RS422 |
| M/S:Protocol | Modbus RTU/ASCII |
M/S/F:Working Mode | Modbus Master, Slave, Transparent Transmission |
| M/S/F:Baud Rate | 300bps-500Kbps |
| M/S/F:Data Bit | Bit 7, Bit 8 |
M/S/F:Parity Checking | None, Odd, Even |
| M/S/F:Stop Bit | Bit1, Bit2 |
M/S/F: Character Interval | 1.5t-200t |
F: Byte Order Conversion | Prohibit, Enable |
M/F:Response Timeout | Customized, default: 1000 |
M/F: Polling Timeout | Customized, default: 100 |
M: Read Data Processing Mode | Hold the last input value, clear the input value |
M: Data Output Mode | Polling, event triggering (data changes) |
M: Module Control Enable | Prohibit, Enable |
M: Module Control Mode | Level trigger (continuously valid), rising edge trigger (single valid) |
M: Power on Event Output | Prohibit, Enable |
| S:Slave ID | Customized, default: 1 |
S:Response Time | Customized, default: 50 |