Welcome Customer !

Membership

Su zhou desisen electronics Co.,Ltd
Free Member ·1YRS
,
Other

Main Products: 探伤仪

Xwboo>Products

SWT-610 end socket vortex flaw detector

Model
Nature of the Manufacturer
Other
Product Category
Metal parts auto detect
Place of Origin
City, Province
Overview
SWT-610 end socket vortex flaw detector
Product Details

SWT-610 end socket vortex flaw detector is an automatic vortex testing equipment to test flaw on external surface to end socket of axisymmetric metal parts 。Especially suitable for test on cylinder metal parts

  scene pictures  


Stepping electric machine drives chain to rotate stepping,and go through probe respectively and testing ,after testing ,when it is rotating ,if qualified ,then the machine will accumulate testing  samples,if is not qualified, then it will be eliminated by air cylinder. The electric control mode uses the light and electricity switch and control box to realize logical control. By outputting of realizing testing signal to testing main engine and probe. 

Main engine and probe use preventive multi-frequency and flat pannel display to predict two modes to realize testing signal output



1、Adopting dot mode differential probe

2、Detecting 0.05MM deep flaw

3、Detecting surface is two end surface

4、Detecting speed is 1.5 seconds per piece

5、Equipment noise <60db。Power consumption <500W(220V)

6、Automatic supply、sorting 、counting

7、There is no damage on accessories after eddy flaw detection

8、No auxiliary process such as wash 、demagnetization





working temperature:-15~55℃

saving temperature:-20~60℃

relative humidity:not exceed 85%

working voltage :AC220±10V


Similar Product Recommend