SMD C2410F series are suitable for overcurrent protection of primary and secondary circuit boards of various electronic equipment. It is widely used in green lighting, consumer electronics, power supply, network communication, UAV, medical instruments and industrial controllers.
1. Electrical Characteristics
Ampere Rating | % of Current Rating | Opening Time |
0.5-30A | 99% | Min.4hours |
200% | Max120sec |
2. Electrical Specifications
Part Number | Current Rating(A) | Voltage Rating(V) | Interrupting Capacity | Typical Cold DCR(mΩ) | Nominal I²T* (A²s) | Marking |
2410-F-0.50A | 0.50 | 125VDC/250VAC | 100A@125VDC 100A@250VAC 300A@48VDC | 0.225 | 0.10 | A |
2410-F-0.63A | 0.63 | 0.171 | 0.12 | B |
2410-F-0.75A | 0.75 | 0.117 | 0.23 | C |
2410-F-1.0A | 1.00 | 0.090 | 0.42 | D |
2410-F-1.25A | 1.25 | 0.070 | 0.62 | E |
2410-F-1.50A | 1.50 | 0.063 | 0.73 | F |
2410-F-1.60A | 1.60 | 0.055 | 1.10 | U |
2410-F-2.00A | 2.00 | 0.036 | 2.50 | H |
2410-F-2.50A | 2.50 | 0.030 | 3.30 | I |
2410-F-3.00A | 3.00 | 125VDC/125VAC | 100A@125VDC 100A@125VAC 300A@48VDC | 0.024 | 0.9 | J |
2410-F-3.15A | 3.15 | 0.023 | 1.0 | K |
2410-F-3.50A | 3.50 | 0.020 | 2.4 | V |
2410-F-4.00A | 4.00 | 0.017 | 3.2 | L |
2410-F-5.00A | 5.00 | 0.014 | 5.0 | M |
2410-F-6.30A | 6.30 | 125VDC | 50A@125VDC 300A@48VDC | 0.0118 | 6.1 | N |
2410-F-7.00A | 7.00 | 0.0099 | 9.8 | O |
2410-F-8.00A | 8.00 | 0.0082 | 14.2 | P |
2410-F-10.0A | 10.0 | 0.0071 | 22.5 | Q |
2410-F-12.0A | 12.0 | 0.0049 | 43.2 | R |
2410-F-15.0A | 15.0 | 0.0038 | 67.5 | S |
2410-F-20.0A | 20.0 | 72VDC | 60A@72VDC 300A@48VDC | 0.0031 | 116 | T |
2410-F-25.0A | 25.0 | 0.0024 | 153 | X |
2410-F-30.0A | 30.0 | 0.0019 | 252 | Y |
3. Dimensions
Type | L | W | T | D |
| (mm) | (mm) | (mm) | (mm) |
C2410 | 6.1±0.20 | 2.50±0.2 | 2.1±0.2 | 1.40±0.35 |

4. Recommended Land Patterns
Dimensions | Spec |
A(mm) | 3.0 |
B(mm) | 8.0 |
C(mm) | 3.0 |
D(mm) | 2.5 |
5. Materials
Components | Material |
Body | Epoxy flame retardant materials |
Fuse-element | Copper alloy |
Terminations | Tin Plated Copper |
6. Part Number Information
7. Time Current Curve

8. Temperature Re-rating Curve
When choosing the fuse's specification,if the operating Environmental temperature beyond the scope from 20~30℃,engineer should consider the environmental temperature's Affection to fuses.Please refer Temperature Re-rating Curve.

9. Product Characteristics
Item | Test condition | Performance | Standard |
Time/Current | 99% of current rating | 4hr Min | UL248-14 |
200% of current rating . | 60sec Max | Factory SPEC |
1000%of current rating | 10msec Max | Factory SPEC |
Interrupting Ability | 250VAC100A 125VDC100A 125VAC50A 65VDC50A 48VDC300A | without permanent arcing,ignition and bursting of fuse link | UL248-14 |
Solder ability | 240℃±5℃,3sec±0.5sec, | 90% coverage Min. | MIL-STD-202 Method 208 |
Resistance to Soldering Heat | 260℃±5℃,10sec±0.5sec, | |△R|: <10% | MIL-STD-202 Method 210 |
Moisture resistance | 10 cycle | |△R|: <10%., no mechanical damage | MIL-STD-202 Method 106 |
Salt Spray | 5%±1% salt solution ,48hours | |△R|: <10% | MIL-STD-202 Method 101 |
Mechanical Shock | Test Condition I: Deenergized. 100G’s peak amplitude, sawtooth wave 6ms duration, 3 cycles XYZ+xyz = 18 shocks | |△R|: <10%., no mechanical damage | MIL-STD-202 Method 213 |
Mechanical Vibration | Amplitude 10Hz~55Hz in 1 min. 2 hours,each XYZ, total 6 hours | |△R|: <10%., no mechanical damage | MIL-STD-202 Method 201 |
Thermal Shock | -65°C to +125°C, 100 cycles, | |△R|: <10%., no mechanical damage | MIL-STD-202 Method 107 |
10. Storage
Packaged Fuse should be storage at ambient temperature for -10~+40 ℃ relative humidity below 80%,the warehouse of Ambient air in non-acidic, non-alkaline or other no corrosive gases,Before use, need to confirm the aluminum foil bag sealing intact.
11. Recommended Solder Curve

12.Packaging
Tape(mm) | Reel(inch) | Quantity |
12.5 | 7 | 2000 |
13. Others
This product is fully in line with the EU ROHS requirements!