Welcome Customer !

Membership

JINAN CGJG LASER EQUIPMENT CO., LTD
Free Member ·1YRS
JiNan,ShanDong
Manufacturer

Main Products: Laser Cutting Machine|Laser Welding Machine|Laser Marking Machine

Xwboo>Products

JINAN CGJG LASER EQUIPMENT CO., LTDFree·1YRS

  • E-mail

    sales@sdcglaser.com

  • Phone

    86531-88996535

  • Address

    1-1808 Lushang phoenix plaza, Tangye middle road,Licheng district, Jinan, Shandong, China

Contact Now

Fiber Laser Metal Cutting Machine

Model
Nature of the Manufacturer
Manufacturer
Product Category
Plate and Tube Fiber Cutting Machine
Place of Origin
City, Province
Overview
1. Low cost and the power consumption is 0.5-1.5kw/h; Customer can cut all kinds of metal sheets by blowing air;2. High-performance. Imported the original packaged fiber laser, with stable performance and the lifespan is over 100,000 hours;3. High speed and efficiency, the speed of cutting metal sheets close to tens of meters;4. The laser maintenance free;5. The cutting edge looks perfect and the appearance is smooth and beautiful;6. Imported the transmission mechanism and servo motor, and high cutting accuracy;7. ......
Product Details

Product Introduction

Product Introduction

image001(001)

One machine can be used for two purposes. The plate cutting part can adjust the table size and single and double platforms according to the needs of customers. The pipe cutting part can effectively cut the personalized pipe with a length of 6 meters and a diameter of less than 230 meters. The crossbeam is made of aviation aluminum casting, and the core components such as servo motor, gear rack, reducer and electronic components are all imported products.

3015-1

Technical Parameters:

Fiber Laser Cutting Machine Configuration: standard suitable for 2000W 3000W 

Laser Source: MAX/RAYCUS 2000W/3000W  

Cutting Head: Raytools auto focus cutting head BM111 

Control System: CYPCUT controller FS2000  

Servo motor: Japan Yaskawa Y: 1300W Y:1300W X: 850W Z:400W 

Dual-temperature: S&A/Hanli cooling system; 

Guide rail : PMI guide rail  

Rack: APEX /YYC rack 

Machine bed: Heat treated heavy sheet welding machine bed;  

Gantry : Aluminium gantry 

Reducer: MOTOVARIO reducer  

Automatic lubrication system

Computer: Industry computer

Model

CG-3015

Working area

3000mm*1500mm

Laser power

1000W~6000W

Dimensions

4530mm*2210mm*790mm                 

Positioning Accuracy

±0.02mm

Repeat positioning accuracy

±0.01mm

Max. acceleration

1.0G

Maximum speed

90m/min

Specified voltage and Frequency         

380V 50Hz/60Hz/60A

Logo

Customized Service

Z Travel

250mm

Cutting Thickness

0.5mm~15mm

Warranty

3 Years

fiber laser metal cutting machine

Reduce servo motor load, reduce inertia, and save power cost, so that the equipment has high speed, high efficiency. Light weight, small inertia and good dynamic performance.

fiber laser metal cutting machine

It is made of multi-section square tube welded, and stiffeners are set inside the tube to increase the strength and tensile property of the bed and the tensile property and stability of the guide rail surface; High temperature annealing treatment can eliminate the stress produced by welding machining. Reduce the loss of laser cutting machine in use, long-term use without deformation.

Schneider Electric

fiber laser metal cutting machine

S&A Water Chiller(Optional)

fiber laser metal cutting machine

 Cypcut Control System

fiber laser metal cutting machine

Sample

1. Widely used in cutting carbon steel,manganese steel,spring steel,stainless steel,titanium alloy,galvanized sheet,aluminum plate,brass copper and other metal plate material.

2. Used for metal round,square tube,such as carbon steel,manganese steel,spring steel,stainless steel,titanium alloy,galvanized sheet Aluminum plate,brass,copper.

3. Ultra-high type,special metal material cutting.

11000

image015_

image019_

Similar Product Recommend