Application
Electrical bushing performance
Among all the indexes required by the national standard, such as compressive property, bending property, electrical property and flame retardant property, PVC electrical casing is an important index to reflect the performance of electrical pipe, and it is also an important index to evaluate the quality of electrical casing. The indicators of electrical casing are as follows:
1. Compressive performance: it is to ensure that the electrical casing will not be flattened and meet the use requirements in the use process, especially in the case of buried concrete. The national standard requires that DF ≤ 25% for 1 min load and 10% for 1 min unloading (DF: change rate of outer diameter);
2. Bending performance: its purpose is to test the cold bending performance of electrical casing. The electric pipe is of - 15 type, that is, under the condition of - 15 ℃± 2 ℃, the electric pipe is bent by spring to 180 degrees without fracture;
3. Electrical performance: it is to detect the insulation strength and insulation resistance of pipes. When the electric pipe is loaded with water for voltage test, 2000 V voltage is applied to keep it from breakdown for more than 15 minutes, and the insulation resistance measured is greater than 100m Ω, which fully meets and exceeds the requirements of national standards.
4. Flame retardant performance: if the electrical pipe is ignited, there shall be no obvious flame propagation. After the fire source is removed, the casing flame shall be extinguished within 30s (i.e. self extinguishment time te ≤ 30s). PVC is Class B1.



