Application
The specification and size of PVC water supply pipe are Φ 20, Φ 25, Φ 32, Φ 40, Φ 50, Φ 63, Φ 75, Φ 90, Φ 110, Φ 125, Φ 140, Φ 160, Φ 180, Φ 200, Φ 225, Φ 250, Φ 280, Φ 315, Φ 355, Φ 400, Φ 450, Φ 500, Φ 630, Φ 720, Φ 800, etc. The pressure shown on PVC water supply pipe is expressed as nominal pressure, expressed in MPa. The nominal pressure is specified as 0.63Mpa, 0.8MPa, 1.0MPa, 1.25mpa, 1.6Mpa, etc. The minimum diameter pipe of each pressure zone is specified as: the minimum diameter of 0.63Mpa pipe is 63mm, the minimum diameter of 0.8MPa pipe is 50mm, the minimum diameter of 1.0MPa pipe is 40mm, the minimum diameter of 1.25mpa pipe is 32mm, and the minimum diameter of 1.6Mpa pipe is 20mm and 25mm. The pipe length is generally 4m, 6m and 8m, which can also be determined by the supplier and the demander through consultation.
(1) The pressure shown in PVC water supply pipe is expressed as nominal pressure, which is expressed in MPa. 1MPa ≈ 10kgf / cm2 is the working pressure of conveying medium under the condition of 20 ℃. However, with the increase of medium temperature (medium with temperature higher than 50 ℃ shall not be transported), the working pressure will decrease accordingly, so the safety factor of sufficient pressure shall be considered in the selection of water supply pipeline objectively
(2) The nominal pressure of water supply pipe is specified as: 0.6MPa, 0.8MPa, 1.0MPa, 1.25mpa, 1.6Mpa, etc.
(3) The nominal pressure of pipes of the same specification is generally divided by the wall thickness of pipes.
(4) The minimum diameter pipe of each pressure zone is specified as: the minimum diameter of 0.6MPa pipe is 63mm, the minimum diameter of 0.8MPa pipe is 50mm, the minimum diameter of 1.0MPa pipe is 40mm, the minimum diameter of 1.25mpa pipe is 32mm, and the minimum diameter of 1.6Mpa pipe is 20mm and 25mm.
(5) The nominal pressure of water supply pipe is generally 1.6Mpa, which is matched with pipes of various pressures.



