Welcome Customer !

Membership

ZhongXing industry control equipment co., ltd
Free Member ·1YRS
,
Other

Main Products: 工控设备

Xwboo>Products

ZhongXing industry control equipment co., ltdFree·1YRS

  • E-mail

    chinastar2003@163.com

  • Phone

    0577-65608165

  • Address

    No.87 ZhaoYang Road Of Economic Development Zone,Rui’An City, ZheJiang Province

Contact Now

GK-61 Automatic photoelectric correction controller (pole type or plug type)

Model
Nature of the Manufacturer
Other
Product Category
Digital EPC controller
Place of Origin
City, Province
Overview
GK-61 Automatic photoelectric correction controller (pole type or plug type)
Product Details

brief introduction:

GK-61 series photoelectric deviation correction controller adds the adjustable function of deviation correction response speed on the basis of GK3,GK4 photoelectric deviation correction controller, which can reduce the excessive vibration of the rectifying motor when the single electric eye corrects the deviation. The deviation correction controller can correct the deviation of all kinds of coils, such as reel paper film, metal foil, non-woven fabric, weaving and so on. According to the different printing patterns of the rectifying material, we can choose the following edge and following line mode, and freely set the single electric eye or double electric eye detection, the rectifying execution motor is the permanent magnet low speed synchronous motor, the user can choose the ball wire rod or the ordinary screw according to their own requirements, thus causes the deviation correction drive. There is a strict proportional relationship between the stroke and the offset of the coil. This product is mainly used in printing and packaging, papermaking, film, textile and other industries need to control the edge of the occasion.

characteristic:

★ Built-in intelligent single-chip microcomputer control

★ The response speed of rectifying deviation can be adjusted.

★ Single or binocular deviation correction can be provided

★ Follow the line and follow the edge to determine

★ Provide external control interface

Parameter number:

 response time :

≤50ms(adjustable)

Deviation correction accuracy:

±0.2mm

output power :

50-500W

etection mode :

Check the edge, follow the line.

control method:

Single electric eye

External switch:

Automatic / manual switch, left / right switch

Annex (selection):

Photoelectric eye, synchronous motor, ball wire rod

Appearance size:

240×320×120(mm)(Length × width × height)

working voltage:

AC220V±15% 50Hz

​​​​​