Welcome Customer !

Membership

ZhongXing industry control equipment co., ltd
Free Member ·1YRS
,
Other

Main Products: 工控设备

Xwboo>Products

ZhongXing industry control equipment co., ltdFree·1YRS

  • E-mail

    chinastar2003@163.com

  • Phone

    0577-65608165

  • Address

    No.87 ZhaoYang Road Of Economic Development Zone,Rui’An City, ZheJiang Province

Contact Now

Preset Programmed Length Controller (Meter)

Model
Nature of the Manufacturer
Other
Product Category
Length & Speed controller
Place of Origin
City, Province
Overview
Preset Programmed Length Controller (Meter)
Product Details

brief introduction:

The ZX168 length controller (meter) is an instrument for calculating the length of the transmission guide rod of the measured material by the Hall switch, and the length of the transmission guide rod is calculated. Can be widely applied to equipment needing length control, such as printing, compounding, cutting, winding machine and the like

characteristic:

★ The main control part is controlled by single chip microcomputer

★ Small size with simple installation

★ With power outage data storage function

★Preset length data control relay output

★ Preset length advance cycle alarm

parameter :

Measurement length range:

0-999999.99rice

Perimeter input range:

0.0001-9.9999rice

Input signal type:

Hall proximity switch, contact, photoelectric switch (NPN)

Display bits:

Automatic shift of 6 - bit LED decimal point.

Output mode:

1 set of preset relay output; 1 set of transistor early alarm output (DC12V)

Power outage maintenance:

10 years

Zero clearing mode:

Panel, terminal, automatic.

Appearance size:

96×48×115(mm)(Width × height × depth)

installation size :

92×44×105(mm)(Width × height × depth)

working voltage:

AC220V±15% 50Hz

Similar Product Recommend