Welcome Customer !

Membership

ZhongXing industry control equipment co., ltd
Free Member ·1YRS
,
Other

Main Products: 工控设备

Xwboo>Products

ZhongXing industry control equipment co., ltdFree·1YRS

  • E-mail

    chinastar2003@163.com

  • Phone

    0577-65608165

  • Address

    No.87 ZhaoYang Road Of Economic Development Zone,Rui’An City, ZheJiang Province

Contact Now

GK-41 automatic photoelectric correction controller

Model
Nature of the Manufacturer
Other
Product Category
Digital EPC controller
Place of Origin
City, Province
Overview
GK-41 automatic photoelectric correction controller
Product Details

brief introduction:

GK-41 series photoelectric deviation correction controller has the advantages of small volume and convenient installation. It can correct the deviation of all kinds of coils, such as reel paper film, metal foil, non-woven cloth, weaving cloth and so on. According to the different printing patterns of the rectifying material, we can choose the following edge and following line mode, and freely set the single electric eye or double electric eye detection, and the deviation correcting executive motor is the permanent magnet low speed synchronous motor. According to their own requirements, the user can choose the ball wire rod or ordinary screw, so that the deviation correction drive stroke and the offset of the coil have a strict proportional relationship. Mainly used in printing and packaging, papermaking, film, textile and other industries need to control the edge of the occasion.

characteristic:

★ Built-in intelligent single-chip microcomputer control

★ The delay of correcting deviation can be set.

★ Single or binocular deviation correction can be provided

★ Follow the line and follow the edge to determine

★ Provide external control interface

Parameter number:

 response time :

≤50ms

Deviation correction accuracy:

Optometry depends on the eye.

Output Power:

50-500W

detection mode :

Check the edge, follow the line

control method:

Single electric eye

External switch:

Automatic / manual switch, left / right switch

Annex (selection):

Photoelectric eye, synchronous motor, ball wire rod

Appearance size:

96×96×100(mm)(Width × height × depth)

installation size :

92×92×90(mm)(Width × height × depth)

working voltage:

AC220V±15% 50Hz